Analysis technology on the temperature and thermal stress of the cask for radioactive material transport

被引：0
|
作者：
Shin, LY [1 ]
Jin, CY [1 ]
Soo, KH [1 ]
Hwan, CS [1 ]
机构：
[1] Chungnam Natl Univ, Grad Sch, Dept Mech Design Engn, Taejon, South Korea
来源：
ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 | 2005年 / 297-300卷
关键词：
cask; KSC-4; thermal analysis; hypothetical accident condition;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The cask is used to transport the radioactive materials, It is required to withstand for the thirty minute under the hypothetical fire accident condition of the 800 degrees C. According to development of the computer simulation, finite element analysis is applied to the calculation widely. But finite element method for the hypothetical accident conditions is not established in domestic regulations. In this study, the temperature and thermal stress analysis of KSC-4 cask under 800 degrees C fire condition is conducted using by ANSYS 7.0 code. In order to analyze finite elements, two-dimensional model of KSC-4 cask is used. Symmetric boundary, convection, and radiation condition are applied in the analysis. As the results, maximum temperature and thermal stress of the KSC-4 cask is evaluated.
引用
收藏
页码：1666 / 1671
页数：6
相关论文
共 50 条
  • [41] Thermal characterization of the solid state and raw material fluconazole by thermal analysis and pyrolysis coupled to GC/MS
    Elisana Afonso Moura
    Lidiane Pinto Correia
    Márcia Ferraz Pinto
    José Valdilânio Virgulino Procópio
    Fábio Santos de Souza
    Rui Oliveira Macedo
    Journal of Thermal Analysis and Calorimetry, 2010, 100 : 289 - 293
  • [42] Stress and distortion behavior for VLSI steady state thermal analysis
    Bougataya, M
    Lakhsasi, A
    Savaria, Y
    Massicotte, D
    CCECE 2003: CANADIAN CONFERENCE ON ELECTRICAL AND COMPUTER ENGINEERING, VOLS 1-3, PROCEEDINGS: TOWARD A CARING AND HUMANE TECHNOLOGY, 2003, : 111 - 116
  • [43] THERMAL VISCOELASTIC ANALYSIS OF PLASTIC COMPONENTS CONSIDERING RESIDUAL STRESS
    Choi, Chel Woo
    Jeoung, Kab Sik
    Moon, Hyung-Il
    Kim, Heon Young
    ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE, 2009, : 869 - +
  • [44] Thermal Stress Analysis of a Dam Wall by Finite Element Model
    Gudukeya, L. K.
    Mbohwa, C.
    WORLD CONGRESS ON ENGINEERING, WCE 2015, VOL II, 2015, : 1059 - 1065
  • [45] The correctional kinetic equation for the peak temperature in the differential thermal analysis
    Yi, C.
    Yanchun, L.
    Yunlong, H.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2008, 93 (01) : 111 - 113
  • [46] The use of thermal analysis in assessing the effect of temperature on a cement paste
    Alarcon-Ruiz, L
    Platret, G
    Massieu, E
    Ehrlacher, A
    CEMENT AND CONCRETE RESEARCH, 2005, 35 (03) : 609 - 613
  • [47] Infrared temperature sensing of mechanically loaded specimens: Thermal analysis
    Y. Rabin
    D. Rittel
    Experimental Mechanics, 2000, 40 : 197 - 202
  • [48] Technology, thermal analysis and economic evaluation of a sunspace located in northern Greece
    Bakos, GC
    Tsagas, NF
    ENERGY AND BUILDINGS, 2000, 31 (03) : 261 - 266
  • [49] HIGH-TEMPERATURE THERMAL ANALYSIS OF SPECIFIC STEEL GRADES
    Gryc, Karel
    Smetana, Bedrich
    Zaludova, Monika
    Klus, Petr
    Michalek, Karel
    Tkadleckova, Marketa
    Dobrovska, Jana
    Socha, Ladislav
    Chmiel, Bohuslav
    21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 103 - 108
  • [50] Thermal Analysis for Temperature Robust Wireless Power Transfer Systems
    Hwang, Kiwon
    Chung, Sanghoon
    Yoon, Uooyeol
    Lee, Manho
    Ahn, Seungyoung
    2013 IEEE WIRELESS POWER TRANSFER (WPT), 2013, : 52 - 55
12345