Analysis technology on the temperature and thermal stress of the cask for radioactive material transport

被引：0
|
作者：
Shin, LY [1 ]
Jin, CY [1 ]
Soo, KH [1 ]
Hwan, CS [1 ]
机构：
[1] Chungnam Natl Univ, Grad Sch, Dept Mech Design Engn, Taejon, South Korea
来源：
ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 | 2005年 / 297-300卷
关键词：
cask; KSC-4; thermal analysis; hypothetical accident condition;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The cask is used to transport the radioactive materials, It is required to withstand for the thirty minute under the hypothetical fire accident condition of the 800 degrees C. According to development of the computer simulation, finite element analysis is applied to the calculation widely. But finite element method for the hypothetical accident conditions is not established in domestic regulations. In this study, the temperature and thermal stress analysis of KSC-4 cask under 800 degrees C fire condition is conducted using by ANSYS 7.0 code. In order to analyze finite elements, two-dimensional model of KSC-4 cask is used. Symmetric boundary, convection, and radiation condition are applied in the analysis. As the results, maximum temperature and thermal stress of the KSC-4 cask is evaluated.
引用
收藏
页码：1666 / 1671
页数：6
相关论文
共 50 条
  • [31] Thermal Analysis on Accident Conditions of Spent Fuel Transport Containers
    Zhang, Xinyue
    Zhou, You-Xin
    Shang, Chao-Hao
    Mao, Yu-Long
    NEW ENERGY POWER GENERATION AUTOMATION AND INTELLIGENT TECHNOLOGY, VOL 2, 2024, 1250 : 403 - 411
  • [32] Thermal Stress Analysis of Laminated LCDs for Aircraft Cockpits
    Feng Qibin
    Hua Yikui
    Lv Guoqiang
    Lu Xiaosong
    6TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: DESIGN, MANUFACTURING, AND TESTING OF SMART STRUCTURES, MICRO- AND NANO- OPTICAL DEVICES, AND SYSTEMS, 2012, 8418
  • [33] SETTING TEMPERATURE FOR THERMAL RECLAMATION OF USED MOULDING SANDS ON THE BASIS OF THERMAL ANALYSIS
    Lucarz, M.
    METALURGIJA, 2015, 54 (02): : 319 - 322
  • [34] THERMAL ANALYSIS OF HIGH TEMPERATURE PHASE TRANSFORMATIONS OF STEEL
    Gryc, K.
    Smetana, B.
    Zaludova, M.
    Michalek, K.
    Tkadleckova, M.
    Dobrovska, J.
    Socha, L.
    Valek, L.
    Pachlopnik, R.
    METALURGIJA, 2013, 52 (04): : 445 - 448
  • [35] Dating of Osteological Material from Archeological Sources Using Thermal Analysis
    D. M. Mognonov
    T. N. Dorzhieva
    L. V. Lbova
    I. V. Zvontsov
    A. I. Buraev
    V. V. Khakhinov
    Russian Journal of Applied Chemistry, 2002, 75 : 504 - 506
  • [36] Thermal analysis of building roof assisted with water heater and insulation material
    D Prakash
    Sādhanā, 2018, 43
  • [37] Thermal analysis of building roof assisted with water heater and insulation material
    Prakash, D.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2018, 43 (03):
  • [38] Thermal characterization of the solid state and raw material fluconazole by thermal analysis and pyrolysis coupled to GC/MS
    Moura, Elisana Afonso
    Correia, Lidiane Pinto
    Pinto, Marcia Ferraz
    Virgulino Procopio, Jose Valdilanio
    de Souza, Fabio Santos
    Macedo, Rui Oliveira
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2010, 100 (01) : 289 - 293
  • [39] THERMAL VISCOELASTIC ANALYSIS OF PLASTIC COMPONENTS CONSIDERING RESIDUAL STRESS
    Choi, Chel Woo
    Jeoung, Kab Sik
    Moon, Hyung-Il
    Kim, Heon Young
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (31-32): : 6241 - 6246
  • [40] Thermal analysis of convective fin with temperature-dependent thermal conductivity and heat generation
    Ghasemi, Seiyed E.
    Hatami, M.
    Ganji, D. D.
    CASE STUDIES IN THERMAL ENGINEERING, 2014, 4 : 1 - 8
12345