Sintering Characteristics of Thermal Barrier YSZ Coatings Made by Suspension Plasma Spraying

被引：3

作者：

Gizynski, M. ^{[1
,2
,3
]}

Chen, X. ^{[1
,4
]}

Araki, H. ^{[1
]}

Tanaka, H. ^{[1
]}

Kuroda, S. ^{[1
]}

Watanabe, M. ^{[1
]}

Pakiela, Z. ^{[2
]}

机构：

[1] Natl Inst Mat Sci NIMS, 1-2-1 Sengen, Tsukuba, Ibaraki 3050047, Japan

[2] Warsaw Univ Technol WUT, Fac Mat Sci & Engn, Woloska 141, PL-02507 Warsaw, Poland

[3] Res Network Lukasiewicz Inst Aviat, Al Krakowska 110-114, PL-02256 Warsaw, Poland

[4] Jinan Univ, 601 West Huangpu Ave, Guangzhou 510632, Peoples R China

来源：

JOURNAL OF THERMAL SPRAY TECHNOLOGY | 2022年 / 31卷 / 05期

关键词：

dilatometer; plasma spraying; sintering; thermal barrier coatings (TBC); yttria-stabilized zirconia polycrystal; MECHANICAL-PROPERTIES; FRACTURE-TOUGHNESS; YTTRIA; QUANTIFICATION; SIMULATION; RESISTANCE; STABILITY; EXPANSION; BEHAVIOR; POROSITY;

D O I：

10.1007/s11666-022-01375-3

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Thermal barrier coatings (TBCs) deposited by suspension plasma spraying (SPS) are recognized as a potent method to increase efficiency and extend the life of gas turbines. The unique microstructure of the SPS coatings provides exceptional mechanical and thermal properties, but on the other hand, affects sintering of the TBCs what could lead to undesirable changes in properties and premature failure. This study attempts to characterize changes occurring in the SPS deposited TBCs during high-temperature exposure. Several SPS yttria-stabilized zirconia coatings were deposited with various spraying parameters including plasma gas composition, standoff distance and suspension. Then, the SPS coatings were subjected to temperature of 1150oC. It turned out that sintering shrinkage of SPS coatings was higher by a factor of 2-4 than APS coating. Detailed analysis of microstructural changes showed that the coatings with limited porosity at high temperature tend to form arrays of fine pores, while the coatings with higher initial porosity formed large spherical pores. Most of the SPS coatings showed a non-typical change of mechanical properties-a decrease in the Young's modulus and toughness. It was shown that peculiar evolution of mechanical properties can be associated with the porosity changes and interactions between pores and propagation crack.

引用

页码：1521 / 1539

页数：19

共 59 条

[1] A CRITICAL-EVALUATION OF INDENTATION TECHNIQUES FOR MEASURING FRACTURE-TOUGHNESS .1. DIRECT CRACK MEASUREMENTS [J].

ANSTIS, GR ;

CHANTIKUL, P ;

LAWN, BR ;

MARSHALL, DB .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1981, 64 (09) :533-538

[2] Quantification of void network architectures of suspension plasma-sprayed (SPS) yttria-stabilized zirconia (YSZ) coatings using Ultra-small-angle X-ray scattering (USAXS) [J].

Bacciochini, Antoine ;

Ilavsky, Jan ;

Montavon, Ghislain ;

Denoirjean, Alain ;

Ben-ettouil, Fadhel ;

Valette, Stephane ;

Fauchais, Pierre ;

Wittmann-teneze, Karine .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (01) :91-102

[3] Quantification of void networks of as-sprayed and annealed nanostructured yttria-stabilized zirconia (YSZ) deposits manufactured by suspension plasma spraying [J].

Bacciochini, Antoine ;

Ben-Ettouil, Fadhel ;

Brousse, Elodie ;

Ilavsky, Jan ;

Montavon, Ghislain ;

Denoirjean, Alain ;

Valette, Stephane ;

Fauchais, Pierre .

SURFACE & COATINGS TECHNOLOGY, 2010, 205 (03) :683-689

[4] High temperature mechanical characterization of plasma-sprayed zirconia-yttria from conventional and nanostructured powders [J].

Baiamonte, L. ;

Marra, F. ;

Pulci, G. ;

Tirillo, J. ;

Sarasini, F. ;

Bartuli, C. ;

Valente, T. .

SURFACE & COATINGS TECHNOLOGY, 2015, 277 :289-298

[5] Plasma spraying of submicron ceramic suspensions using a continuous ink jet printer [J].

Blazdell, P ;

Kuroda, S .

SURFACE & COATINGS TECHNOLOGY, 2000, 123 (2-3) :239-246

[6]

Boulos M.I., 1994, THERMAL PLASMAS, V1

[7]

BROEKAERT WF, 1995, PLANT PHYSIOL, V108, P1353, DOI [10.1182/blood-2012-08-450627, 10.1016/j.envsoft.2012.10.004, 10.1016/j.jaap.2012.10.004, 10.1016/j.eclinm.2021.100771, 10.1016/j.chiabu.2021.105188, 10.1016/j.biortech.2014.10.140, 10.1016/j.tourman.2012.10.007, 10.1016/j.coelec.2021.100721, 10.1016/j.carres.2021.108368]

[8] Ceramic materials for thermal barrier coatings [J].

Cao, XQ ;

Vassen, R ;

Stoever, D .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (01) :1-10

[9] Highly Segmented Thermal Barrier Coatings Deposited by Suspension Plasma Spray: Effects of Spray Process on Microstructure [J].

Chen, Xiaolong ;

Honda, Hiroshi ;

Kuroda, Seiji ;

Araki, Hiroshi ;

Murakami, Hideyuki ;

Watanabe, Makoto ;

Sakka, Yoshio .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (08) :1638-1649

[10] Columnar and DVC-structured thermal barrier coatings deposited by suspension plasma spray: high-temperature stability and their corrosion resistance to the molten salt [J].

Chen, Xiaolong ;

Ohnuki, Takuma ;

Kuroda, Seiji ;

Gizynski, Maciej ;

Araki, Hiroshi ;

Murakami, Hideyuki ;

Watanabe, Makoto ;

Sakka, Yoshio .

CERAMICS INTERNATIONAL, 2016, 42 (15) :16822-16832

← 1 2 3 4 5 6 →