Influence of gold thin-film interlayers on anodic bonding of copper microstructures produced by LIGA

被引:3
|
作者
Gerlach, A [1 ]
Maas, D [1 ]
Seidel, D [1 ]
机构
[1] Forschungszentrum Karlsruhe, Inst Mikrostrukturtech, D-76021 Karlsruhe, Germany
关键词
D O I
10.1007/s005420050149
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Neither pure copper nor solid gold can be anodically bonded to glass. It is only the gold coating on the copper which allows a joint to be built up as a result of the copper ions diffusing into the gold layer, but not many of them being able to migrate into the glass. To encapsulate microstructures produced by the LIGA technique, anodic bonding of gold-coated copper to Coming 0211-type glass was studied. For demonstration purposes, a glass platelet made of Coming 0211 was anodically bonded to a LIGA linear actuator consisting of electroplated copper coated with 1 mu m of gold. A better understanding about the decisive parameters in anodic bonding was obtained by varying the bonding temperature and the thickness of the gold layer. Glass can be bonded on to the entire surface of gold layers 0.5-1 mu m thick at temperatures as low as 300 degrees C; however, when the systems cool to room temperature, stress-induced cracks arise in the glass. On the other hand, thicker gold layers of 2.5 to 10 mu m thickness require higher bonding temperatures for the same period of heating, but prevent the occurrence of such cracks because of their higher ductility.
引用
收藏
页码:100 / 104
页数:5
相关论文
共 50 条
  • [21] BONDING OF A NIOBIUM WIRE TO A NIOBIUM THIN-FILM
    JASZCZUK, W
    TERBRAKE, HJM
    FLOKSTRA, J
    VELDHUIS, D
    STAMMIS, R
    ROGALLA, H
    MEASUREMENT SCIENCE AND TECHNOLOGY, 1991, 2 (11) : 1121 - 1122
  • [22] ASSEMBLY AND BONDING OF THIN-FILM HYBRID CIRCUITS
    DEUTSCH, RJ
    WESTERN ELECTRIC ENGINEER, 1969, 13 (01): : 2 - &
  • [23] OPTIMIZATION OF VOLTAGE-CONTROLLED THIN-FILM MICROSTRUCTURES
    RUIZ, O
    RUBIO, C
    MARCO, S
    CARMONA, M
    SAMITIER, J
    MORANTE, JR
    SENSORS AND ACTUATORS A-PHYSICAL, 1995, 47 (1-3) : 613 - 617
  • [24] Analysis of the Wicking and Thin-Film Evaporation Characteristics of Microstructures
    Ranjan, Ram
    Murthy, Jayathi Y.
    Garimella, Suresh V.
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2009, 131 (10): : 1 - 11
  • [25] Interfacial strain-field in thin-film microstructures
    Shen, Q
    Kycia, S
    MICROSCOPIC SIMULATION OF INTERFACIAL PHENOMENA IN SOLIDS AND LIQUIDS, 1998, 492 : 389 - 394
  • [26] Thin-film ruthenium microstructures for transition edge sensors
    Ilin, A. S.
    Cohn, I. A.
    Vystavkin, A. N.
    Kovalenko, A. G.
    INTERNATIONAL CONFERENCE ON MICRO- AND NANO-ELECTRONICS 2016, 2016, 10224
  • [27] NONDESTRUCTIVE EVALUATION OF THIN-FILM MICROSTRUCTURES BY PICOSECOND ULTRASONICS
    MARIS, HJ
    GRAHN, HT
    TAUC, J
    NONDESTRUCTIVE MONITORING OF MATERIALS PROPERTIES, 1989, 142 : 39 - 49
  • [28] Negative Barkhausen jumps in permalloy thin-film microstructures
    Yang, Shuqiang
    Beach, G. S. D.
    Erskine, J. L.
    JOURNAL OF APPLIED PHYSICS, 2006, 100 (11)
  • [29] Investigation of magnetoimpedance effect in amorphous thin-film microstructures
    Giouroudi, I
    Hauser, H
    Musiejovsky, L
    Steurer, J
    Didosyan, YS
    JOURNAL OF APPLIED PHYSICS, 2005, 97 (10)
  • [30] Negative Barkhausen jumps in permalloy thin-film microstructures
    Yang, Shuqiang
    Beach, G.S.D.
    Erskine, J.L.
    Journal of Applied Physics, 2006, 100 (11):