Laser 3D printing of CoCrFeMnNi high-entropy alloy

被引：72
作者：
Gao, Xiaoyu [1 ]
Lu, Yunzhuo [1 ]
机构：
[1] Dalian Jiaotong Univ, Sch Mat Sci & Engn, Dalian 116028, Peoples R China
来源：
MATERIALS LETTERS | 2019年 / 236卷
基金：
中国国家自然科学基金;
关键词：
Laser 3D printing; High-entropy alloy; Microstructure; Laser processing; MECHANICAL-PROPERTIES; SOLID-PHASE; MICROSTRUCTURE; EVOLUTION;
D O I：
10.1016/j.matlet.2018.10.084
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Due to their superior properties, high-entropy alloys (HEAs) are considered as novel structural materials that can substitute conventional alloys. From the viewpoint of future applications, it is important to explore methods for producing complex shaped and homogeneous HEAs. In this study, laser 3D printing technology is employed to fabricate CoCrFeMnNi HEA. The microstructure and mechanical properties of laser 3D printed HEA are also evaluated. An equiaxed-to-columnar transition structure can be observed in the melt pool of the printed sample. The fine BCC phase is found to distribute at the grain boundaries of the FCC matrix, which is the major phase of the printed sample. The printed HEA exhibits an outstanding combination of high strength and excellent ductility. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：77 / 80
页数：4
相关论文
共 20 条
  • [1] Fundamental deformation behavior in high-entropy alloys: An overview
    Diao, H. Y.
    Feng, R.
    Dahmen, K. A.
    Liaw, P. K.
    [J]. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2017, 21 (05) : 252 - 266
  • [2] CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment
    Fujieda, Tadashi
    Shiratori, Hiroshi
    Kuwabara, Kosuke
    Hirota, Mamoru
    Kato, Takahiko
    Yamanaka, Kenta
    Koizumi, Yuichiro
    Chiba, Akihiko
    Watanabe, Seiichi
    [J]. MATERIALS LETTERS, 2017, 189 : 148 - 151
  • [3] Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system
    He, J. Y.
    Liu, W. H.
    Wang, H.
    Wu, Y.
    Liu, X. J.
    Nieh, T. G.
    Lu, Z. P.
    [J]. ACTA MATERIALIA, 2014, 62 : 105 - 113
  • [4] Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping
    Kunce, I.
    Polanski, M.
    Karczewski, K.
    Plocinski, T.
    Kurzydlowski, K. J.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 648 : 751 - 758
  • [5] Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS)
    Kunce, I.
    Polanski, M.
    Bystrzycki, J.
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2013, 38 (27) : 12180 - 12189
  • [6] Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
    Laurent-Brocq, Mathilde
    Akhatova, Alfiya
    Perriere, Loic
    Chebini, Siham
    Sauvage, Xavier
    Leroy, Eric
    Champion, Yannick
    [J]. ACTA MATERIALIA, 2015, 88 : 355 - 365
  • [7] Multi-phase refining of an AlCoCrFeNi high entropy alloy by hot compression
    Lee, K. S.
    Bae, B.
    Kang, J. -H.
    Lim, K. R.
    Na, Y. S.
    [J]. MATERIALS LETTERS, 2017, 198 : 81 - 84
  • [8] Phase evolution of a heat-treatable aluminum alloy during laser additive manufacturing
    Li, Jing
    Cheng, Xu
    Liu, Dong
    Zhang, Shu-Quan
    Li, Zhuo
    He, Bei
    Wang, Hua-Ming
    [J]. MATERIALS LETTERS, 2018, 214 : 56 - 59
  • [9] Laser 3D printing of W-Cu composite
    Liu, Zhenghong
    Zhou, Wenchao
    Lu, Yunzhuo
    Xu, Huidong
    Qin, Zuoxiang
    Lu, Xing
    [J]. MATERIALS LETTERS, 2018, 225 : 85 - 88
  • [10] Grain boundary wetting by a solid phase;: microstructural development in a Zn-5 wt% Al alloy
    López, GA
    Mittemeijer, EJ
    Straumal, BB
    [J]. ACTA MATERIALIA, 2004, 52 (15) : 4537 - 4545
12