Oxidation behaviour of a Ge-modified silicide coating on an Nb-Si based alloy in the moderate temperature range

被引:32
|
作者
Wang, Changliang [1 ]
Shao, Wei [1 ,2 ]
Wang, Wan [1 ]
Zhou, Chungen [1 ]
机构
[1] Beijing Univ Aeronaut & Astronaut, Dept Mat Sci & Engn, Beijing 100191, Peoples R China
[2] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing 100124, Peoples R China
基金
国家重点研发计划; 中国国家自然科学基金;
关键词
Intermetallics; Oxidation; Selective oxidation; MECHANICAL-PROPERTIES; TI; CR; AL; MICROSTRUCTURE; RESISTANCE; MO; HF; COMPOSITES; DEPOSITION;
D O I
10.1016/j.corsci.2019.108249
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The oxidation characteristics of Ge-modified silicide coating on the Nb-Si based alloy within the moderate temperatures were investigated. Results show that the mass gains of the coated alloys are 0.41, 0.58 and 0.37 mg/cm(2) after oxidation at 700 degrees C, 750 degrees C and 800 degrees C for 100 h. There is no pest phenomenon at the test temperatures. The oxide scale is composed of amorphous aluminosilica and SiO2-GeO2 with TiO2 dispersed in some of SiO2-GeO2. The good oxidation resistance of the Ge-modified silicide coating at moderate temperatures is attributed to the selective oxidation of Ti and Si, as well as the formation of glassy SiO2-GeO2.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] Effect of Spraying Power on Oxidation Resistance of MoSi2-ZrB2 Coating for Nb-Si Based Alloy Prepared by Atmospheric Plasma
    Zhuo, Guanqun
    Su, Linfen
    Jiang, Kaiyong
    Yang, Jianyong
    MATERIALS, 2020, 13 (22) : 1 - 10
  • [22] Microstructure and oxidation resistance of composition gradients Nb-Si based alloy thin film
    Jiang, Wei
    Li, Meifeng
    Sha, Jiangbo
    Zhou, Chungen
    MATERIALS & DESIGN, 2020, 192
  • [23] Oxidation and interdiffusion behavior of a germanium-modified silicide coating on an Nb–Si-based alloy
    Jin-long Li
    Wan Wang
    Chun-gen Zhou
    International Journal of Minerals Metallurgy and Materials, 2017, 24 (03) : 289 - 296
  • [24] Oxidation and interdiffusion behavior of a germanium-modified silicide coating on an Nb–Si-based alloy
    Jin-long Li
    Wan Wang
    Chun-gen Zhou
    International Journal of Minerals, Metallurgy, and Materials, 2017, 24 : 289 - 296
  • [25] Synchronous improvement in room-temperature fracture toughness and high-temperature oxidation resistance of Nb-Si based alloys with Erbium addition
    Wang, Yu
    Jia, Lina
    Sun, Guangxin
    Zhang, Fengxiang
    Ye, Chengtong
    Zhang, Hu
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 94
  • [26] Room temperature mechanical properties and high temperature oxidation resistance of a high Cr containing Nb-Si based alloy
    Jia, L. N.
    Weng, J. F.
    Li, Z.
    Hong, Z.
    Su, L. F.
    Zhang, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 623 : 32 - 37
  • [27] Improvement in oxidation resistance of suicide coating on an Nb-Ti-Si based ultrahigh temperature alloy by second aluminizing treatment
    Zhang, Ping
    Guo, Xiping
    CORROSION SCIENCE, 2015, 91 : 101 - 107
  • [28] Preparation and oxidation resistance of silicide/aluminide composite coatings on an Nb-Ti-Si based alloy
    Zhang, Ping
    Guo, Xiping
    SURFACE & COATINGS TECHNOLOGY, 2015, 274 : 18 - 25
  • [29] Excellent oxidation resistance: A dense and well-bonded MoSi2/(Nb,X)Si2 composite coating on Nb-Si based alloy
    Zhang, Weiping
    Qiao, Yanqiang
    Guo, Xiping
    Li, Longfei
    Nan, Xi
    CORROSION SCIENCE, 2025, 249
  • [30] High-throughput synthesis of oxidation-resistant Nb-Si based alloy thin film by magnetron co-sputtering
    Sun, Chen
    Jiang, Wei
    Li, Meifeng
    Sha, Jiangbo
    Zhou, Chungen
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2021, 31 (03) : 454 - 460