THE INFLUENCE OF THE COOLING EFFECT OF THE MOULDS ON THE QUALITY OF CASTINGS FROM ALUMINUM ALLOYS

被引：0
|
作者：
Lichy, Petr [1 ]
Beno, Jaroslav [1 ]
Kroupova, Ivana [1 ]
Radkovsky, Filip [1 ]
Krenek, Roman [1 ]
机构：
[1] Tech Univ Ostrava, VSB, Dept Met & Foundry Engn, Ostrava, Czech Republic
来源：
METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2014年
关键词：
Aluminum alloy; cooling effect; microstructure; casting; REFINEMENT;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The quality of cast components is largely dependent on the structure of the casting. With the achievement of optimal fine grain structure, without any internal or surface defects, it is possible to obtain sufficient mechanical properties of the casting. This effect can be achieved using mould with a higher cooling effect. The aim of this paper consists in evaluation of quality of the cast components from selected aluminum alloys using microstructure analysis and evaluation methods of physical properties of castings. Samples from selected materials have been prepared by casting into the casting moulds with various cooling effect in order to achieve different conditions of solidification and cooling of the test samples.
引用
收藏
页码：1028 / 1031
页数：4
相关论文
共 50 条
  • [41] THE INFLUENCE OF SPIN CASTING PARAMETERS ON DIMENSIONAL ACCURACY OF CASTINGS CAST INTO SILICON MOULDS
    Vrabec, Jan
    Bajcicak, Martin
    Beznak, Matej
    Suba, Roland
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2013, 20 (03): : 519 - 524
  • [42] The influence of spin casting parameters on dimensional accuracy of castings cast into silicon moulds
    Utjecaj parametara centrifugalnog lijevanja na dimenzionalnu točnost odljevaka lijevanih u silicijskim kalupima
    2013, Strojarski Facultet (20):
  • [43] Influence of temperatures of melt overheating and pouring on the quality of aluminum alloy lost foam castings
    Deev, V. B.
    Ponomareva, K. V.
    Prikhodko, O. G.
    Smetanyuk, S. V.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2017, 58 (04) : 373 - 377
  • [44] MONITORING OF COPPER ALLOYS STRUCTURES DURING SOLIDIFICATION AND COOLING OF CASTINGS
    Machuta, Jiri
    Nova, Iva
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1263 - 1270
  • [45] Metal quality of secondary alloys for Al castings
    Velasco, Eulogio
    Proulx, Jasmin
    LIGHT METALS 2006 VOL 4: CAST SHOP TECHNOLOGY AND RECYCLING - ALUMINUM, 2006, : 721 - +
  • [46] The influence of the melt cooling rate on shrinkage behaviour during solidification of aluminum alloys
    Deev, V. B.
    Prusov, E. S.
    Shunqi, M.
    Ri, E. H.
    Bazlova, T. A.
    Temlyantsev, M. V.
    Smetanyuk, S. V.
    Ponomareva, S. V.
    Vdovin, K. N.
    INTERNATIONAL WORKSHOP ADVANCED TECHNOLOGIES IN MATERIAL SCIENCE, MECHANICAL AND AUTOMATION ENGINEERING - MIP: ENGINEERING - 2019, 2019, 537
  • [47] Comparison of the Porosity of Aluminum Alloys Castings Produced by Squeeze Casting
    Zyska, Andrzej
    Boron, Kinga
    MANUFACTURING TECHNOLOGY, 2021, 21 (05): : 725 - 734
  • [48] Effect of cooling ribs on the solidification of junctions in castings
    Creese, Robert C.
    Sarfaraz, Ahmad
    Giessereipraxis, 1988, (13-14): : 185 - 189
  • [49] ORIGIN OF POROSITY IN CASTINGS OF MAGNESIUM-ALUMINUM AND OTHER ALLOYS
    WHITTENBERGER, EJ
    RHINES, FN
    JOURNAL OF METALS, 1952, 4 (04): : 409 - 420
  • [50] ORIGIN OF POROSITY IN CASTINGS OF MAGNESIUM-ALUMINUM AND OTHER ALLOYS
    WHITTENBERGER, EJ
    RHINES, FN
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1952, 194 (04): : 409 - 420
12345