Nonlinear primary resonances of lattice sandwich beams with pyramidal truss core and viscoelastic surfaces

被引:13
作者
Yao, Guo [1 ,2 ]
Li, Fengming [2 ]
机构
[1] Northeastern Univ, Sch Mech Engn & Automat, Shenyang 110819, Liaoning, Peoples R China
[2] Harbin Engn Univ, Coll Aerosp & Civil Engn, Harbin 150001, Heilongjiang, Peoples R China
基金
中国国家自然科学基金;
关键词
BEHAVIOR; PANELS; PLATES;
D O I
10.1007/s00707-018-2229-9
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this paper, the nonlinear forced vibration properties of the lattice sandwich beam with pyramidal truss core and viscoelastic surfaces subjected to harmonic external excitation are investigated. The nonlinear dynamic model of the lattice sandwich beam is formulated based on the Kelvin-Voigt viscoelastic model and discretized into nonlinear ordinary equations with multiple degrees of freedom by using the assumed mode method. The nonlinear amplitude-frequency curves of the steady-state responses of the beam are obtained by an iterative algorithm. The effects of the external excitation amplitude, the inclination angle of the truss core, and the viscoelastic coefficient of the surface material on the nonlinear forced vibration behaviors of the beam are analyzed. From the research results, it can be seen that the lattice sandwich beam shows very rich and novel nonlinear dynamic behavior. The viscoelastic damping of the surfaces can decrease the resonance amplitudes of most modes of the beam. An acceptable optimal inclination angle considering the equivalent mass density of the pyramidal truss core and the resonance amplitude of the beam is obtained. The evolution rules of the lattice sandwich beam with the material and structural parameters obtained from the preset study are helpful for the engineering applications of this kind of lightweight sandwich structures.
引用
收藏
页码:4091 / 4100
页数:10
相关论文
共 22 条
  • [1] Dynamic response of metallic lattice sandwich structures to impulsive loading
    Cui, Xiaodong
    Zhao, Longmao
    Wang, Zhihua
    Zhao, Han
    Fang, Daining
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2012, 43 : 1 - 5
  • [2] Response of metallic pyramidal lattice core sandwich panels to high intensity impulsive loading in air
    Dharmasena, Kumar P.
    Wadley, Haydn N. G.
    Williams, Keith
    Xue, Zhenyu
    Hutchinson, John W.
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2011, 38 (05) : 275 - 289
  • [3] Dill E.H., 2006, Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity
  • [4] Sandwich panels with Kagome lattice cores reinforced by carbon fibers
    Fan, H. L.
    Meng, F. H.
    Yang, W.
    [J]. COMPOSITE STRUCTURES, 2007, 81 (04) : 533 - 539
  • [5] Shear behavior of aluminum lattice truss sandwich panel structures
    Kooistra, Gregory W.
    Queheillalt, Douglas T.
    Wadley, Haydn N. G.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 472 (1-2): : 242 - 250
  • [6] Active vibration control of lattice sandwich beams using the piezoelectric actuator/sensor pairs
    Li, Feng-Ming
    Lyu, Xiu-Xiu
    [J]. COMPOSITES PART B-ENGINEERING, 2014, 67 : 571 - 578
  • [7] Impact transient response in lattice sandwich panels under various boundaries using reverberation ray matrix method
    Liu, Chunchuan
    Li, Fengming
    [J]. COMPOSITE STRUCTURES, 2015, 125 : 239 - 246
  • [8] Lou J, 2013, ACTA MECH SOLIDA SIN, V26, P458
  • [9] Underwater blast response of free-standing sandwich plates with metallic lattice cores
    McShane, G. J.
    Deshpande, V. S.
    Fleck, N. A.
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2010, 37 (11) : 1138 - 1149
  • [10] The response of clamped sandwich plates with lattice cores subjected to shock loading
    McShane, GJ
    Radford, DD
    Deshpande, VS
    Fleck, NA
    [J]. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2006, 25 (02) : 215 - 229