Fabrication of Fe-6.5wt% Si bulk by spark plasma sintering

被引：0

作者：

Hu, CZ ^{[1
]}

Zhang, DM ^{[1
]}

Zhang, LM ^{[1
]}

机构：

[1] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China

来源：

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2005年 / 20卷 / 01期

关键词：

Fe-6.5wt% Si; spark plasma sintering; mechanical alloying; non-equilibrium;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fe-6.5 wt% Si composite compact was fabricated by spark plasma sintering SPS Mechanical alloying (AM) was used to prepare Fe-Si composite powders. The composite powders were sintered by SPS at elev-sated temperature from 500 degrees C to 700 degrees C. The experimental results indicate that the non-equilibrium state of composite Fe-Si is preserved in the compact. The density of the bulk rises with the increasing temperature and there is no diffusion of silicon and iron in the interface.

引用

页码：72 / 74

页数：3

共 50 条

[41] Bulk ultrafine binderless WC prepared by spark plasma sintering
Huang, B
Chen, LD
Bai, SQ
SCRIPTA MATERIALIA, 2006, 54 (03) : 441 - 445
[42] Preparation of Bulk Glassy Fe76Si9B10P5 as a Soft Magnetic Material by Spark Plasma Sintering
Zhao, Zhankui
Chang, Chuntao
Makino, Akihiro
Okubo, Akira
Inoue, Akihisa
MATERIALS TRANSACTIONS, 2009, 50 (03) : 487 - 489
[43] Spark plasma sintering Nd2Fe14B/α-Fe bulk exchange-spring magnets
Yue, M
Tian, M
Liu, WQ
Zhang, JX
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 2161 - 2164
[44] Microstructure and corrosion study of Fe-based bulk metallic glass obtained by spark plasma sintering
Zarazua-Villalobos, L.
Mary, N.
Soo-Hyun, J.
Ogawa, K.
Kato, H.
Ichikawa, Y.
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 880 (880)
[45] Fabrication and Densification of a Nanocrystalline CoSi Compound by Mechanical Alloying and Spark Plasma Sintering
Lee, Chung-Hyo
KOREAN JOURNAL OF MATERIALS RESEARCH, 2023, 33 (03): : 101 - 105
[46] Fe75Zr3Si13B9 magnetic materials prepared by spark plasma sintering
Wang, Xing-hua
Wang, Ge
Zhu, Yu-ying
Bao, Jin-feng
Du, Xiong-fei
Li, Qiang
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (03) : 712 - 717
[47] Mechanical Properties of Cu70Fe30 (at%) Bulk Metastable Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering
Battu, Santhi
Diraviam, Arvindha Babu
Singh, Vajinder
Kumar, Deepak
Seelam, Uma Maheswara Rao
ADVANCED ENGINEERING MATERIALS, 2025, 27 (06)
[48] IN SITU FABRICATION OF Al 2024-Mg2Si COMPOSITE BY SPARK PLASMA SINTERING OF REACTIVE MECHANICALLY ALLOYED POWDER
Sadeghian, Z.
Dezfulizadeh, R.
IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2016, 13 (02) : 10 - 19
[49] Fabrication of porous Zr-Cu-Al-Ni bulk metallic glass by spark plasma sintering process
Xie, Guoqiang
Zhang, Wei
Louzguine-Luzgin, Dmitri V.
Kimura, Hisamichi
Inoue, Akihisa
SCRIPTA MATERIALIA, 2006, 55 (08) : 687 - 690
[50] Fabrication of ultrafine grain WC alloys by spark plasma sintering
张建兵
李元元
李小强
龙雁
陈维平
广东有色金属学报, 2005, (Z1) : 548 - 552

← 1 2 3 4 5 →