Fabrication of Fe-6.5wt% Si bulk by spark plasma sintering

被引：0
|
作者：
Hu, CZ [1 ]
Zhang, DM [1 ]
Zhang, LM [1 ]
机构：
[1] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2005年 / 20卷 / 01期
关键词：
Fe-6.5wt% Si; spark plasma sintering; mechanical alloying; non-equilibrium;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fe-6.5 wt% Si composite compact was fabricated by spark plasma sintering SPS Mechanical alloying (AM) was used to prepare Fe-Si composite powders. The composite powders were sintered by SPS at elev-sated temperature from 500 degrees C to 700 degrees C. The experimental results indicate that the non-equilibrium state of composite Fe-Si is preserved in the compact. The density of the bulk rises with the increasing temperature and there is no diffusion of silicon and iron in the interface.
引用
收藏
页码：72 / 74
页数：3
相关论文
共 50 条
  • [31] Consolidation and wear resistance of Fe based bulk metallic glass composites by spark plasma sintering
    Dong, Weiwei
    Dong, Minshuai
    Qian, Danbo
    Wang, Zixiao
    Yang, Yuchen
    Zhu, Shigen
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2024, 623
  • [32] Effects of spark plasma sintering parameters on properties of Fe-based bulk amorphous alloys
    Li, Chunyan
    Chen, Jiaxin
    Hou, Shaojie
    Zhang, Qiang
    Li, Xiaocheng
    Kou, Shengzhong
    MATERIALS TODAY COMMUNICATIONS, 2023, 37
  • [33] Preparation of bulk Fe75Nb3Si13B9 amorphous and nanocrystalline alloys by spark plasma sintering
    Feng, Y. T.
    Wang, X. H.
    Wang, G.
    Li, Q.
    FERROELECTRICS, 2016, 505 (01) : 190 - 199
  • [34] Fabrication of Porous Materials by Spark Plasma Sintering: A Review
    Dudina, Dina V.
    Bokhonov, Boris B.
    Olevsky, Eugene A.
    MATERIALS, 2019, 12 (03)
  • [35] Fabrication of dense iron silicides by spark plasma sintering
    Tani, J
    Mizuuchi, K
    Kido, H
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2001, 109 (01) : 55 - 59
  • [36] Al-La-Ni-Fe bulk metallic glasses produced by mechanical alloying and spark-plasma sintering
    Choi, P. P.
    Kim, J. S.
    Nguyen, O. T. H.
    Kwon, D. H.
    Kwon, Y. S.
    Kim, J. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 1119 - 1122
  • [37] Bulk Fe-Al-C nanoalloys made by mechanically alloying with subsequent spark plasma sintering and their mechanical properties
    Minamino, Y
    Koizumi, Y
    Tsuji, N
    Hirohata, N
    Mizuuchi, I
    Ohkanda, Y
    BULK AND GRADED NANOMETALS, 2005, 101-102 : 103 - 110
  • [38] Facile synthesis of Fe-6.5wt%Si/SiO2 soft magnetic composites as an efficient soft magnetic composite material at medium and high frequencies
    Wu, Z. Y.
    Jiang, Z.
    Fan, X. A.
    Zhou, L. J.
    Wang, W. L.
    Xu, K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 742 : 90 - 98
  • [39] Effects of Spark Plasma Sintering Parameters on Microstructure and Properties of Al-50 wt.% Si Alloys
    Gao Chong
    Niu Li-Bin
    Ma Lan
    Huang Haoxuan
    Ma Jun
    An Yu-Jiao
    Hu Yu-Yang
    POWDER METALLURGY AND METAL CERAMICS, 2022, 60 (9-10) : 556 - 566
  • [40] PROPERTIES OF La(Fe, Si)13 MAGNETOCALORIC COMPOUNDS PREPARED BY REACTIVE SPARK PLASMA SINTERING
    Paul-Boncour, V.
    Patissier, A.
    Nakouri, K.
    Bessais, L.
    7TH INTERNATIONAL CONFERENCE ON MAGNETIC REFRIGERATION AT ROOM TEMPERATURE, 2016, : 31 - 34
12345