Bio-oil production via fast pyrolysis of biomass residues from cassava plants in a fluidised-bed reactor

被引:134
|
作者
Pattiya, Adisak [1 ]
机构
[1] Mahasarakham Univ, Fac Engn, Bioenergy Res Lab, Kamriang 44150, Maha Sarakham, Thailand
关键词
Bio-oil; Biomass; Cassava plants; Fast pyrolysis; Fluidised-bed; MINERAL MATTER; RICE STRAW; LIQUID; YIELDS; PRETREATMENT; TEMPERATURE; STABILITY; BAGASSE;
D O I
10.1016/j.biortech.2010.08.117
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
Biomass residues from cassava plants, namely cassava stalk and cassava rhizome, were pyrolysed in a fluidised-bed reactor for production of bio-oil. The aims of this work were to investigate the yields and properties of pyrolysis products produced from both feedstocks as well as to identify the optimum pyrolysis temperature for obtaining the highest organic bio-oil yields. Results showed that the maximum yields of the liquid bio-oils derived from the stalk and rhizome were 62 wt.% and 65 wt.% on dry basis, respectively. The pyrolysis temperatures that gave highest bio-oil yields for both feedstocks were in the range of 475-510 degrees C. According to the analysis of the bio-oils properties, the bio-oil derived from cassava rhizome showed better quality than that derived from cassava stalk as the former had lower oxygen content, higher heating value and better storage stability. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1959 / 1967
页数:9
相关论文
共 50 条
  • [21] Effect of operating parameters on production of bio-oil from fast pyrolysis of maize stalk in bubbling fluidized bed reactor
    Ali, Najaf
    Saleem, Mahmood
    Shahzad, Khurram
    Hussain, Sadiq
    Chughtai, Arshad
    POLISH JOURNAL OF CHEMICAL TECHNOLOGY, 2016, 18 (03) : 88 - 96
  • [22] Effect of condensation-assisted solid media on the production of bio-oil by fast pyrolysis of cassava residues in a free-fall reactor
    Rueangsan, Koson
    Sonsupap, Sathapon
    Promsampao, Nuttapan
    Chollacoop, Nuwong
    Pattiya, Adisak
    JOURNAL OF THE ENERGY INSTITUTE, 2023, 107
  • [23] Production and characterization of bio-oil and biochar from ablative pyrolysis of lignocellulosic biomass residues
    Khuenkaeo, Nattawut
    Tippayawong, Nakorn
    CHEMICAL ENGINEERING COMMUNICATIONS, 2020, 207 (02) : 153 - 160
  • [24] Bio-oil production via fast pyrolysis of cassava residues combined with ethanol and volcanic rock in a free-fall reactor
    Rueangsan, Koson
    Heman, Adcha
    Kraisoda, Pakkip
    Tasarod, Homhuan
    Duanguppama, Keyoon
    Trisupakitti, Somsuk
    Morris, John
    COGENT ENGINEERING, 2023, 10 (01):
  • [25] Effect of hydrothermal pretreatment on properties of bio-oil produced from fast pyrolysis of eucalyptus wood in a fluidized bed reactor
    Chang, Sheng
    Zhao, Zengli
    Zheng, Anqing
    Li, Xiaoming
    Wang, Xiaobo
    Huang, Zhen
    He, Fang
    Li, Haibin
    BIORESOURCE TECHNOLOGY, 2013, 138 : 321 - 328
  • [26] Fast pyrolysis of sugarcane residues in a fluidised bed reactor with a hot vapour filter
    Pattiya, Adisak
    Suttibak, Suntorn
    JOURNAL OF THE ENERGY INSTITUTE, 2017, 90 (01) : 110 - 119
  • [27] Fast pyrolysis of microalgae remnants in a fluidized bed reactor for bio-oil and biochar production
    Wang, Kaige
    Brown, Robert C.
    Homsy, Sally
    Martinez, Liliana
    Sidhu, Sukh S.
    BIORESOURCE TECHNOLOGY, 2013, 127 : 494 - 499
  • [28] Improvement of Properties of Bio-Oil from Biomass Pyrolysis in Auger Reactor Coupled to Fluidized Catalytic Bed Reactor
    Campusano, Balkydia
    Jabbour, Michael
    Abdelouahed, Lokmane
    Mignot, Melanie
    Devouge-Boyer, Christine
    Taouk, Bechara
    PROCESSES, 2024, 12 (11)
  • [29] Fast pyrolysis of macroalga Saccharina japonica in a bubbling fluidized-bed reactor for bio-oil production
    Hoang Vu Ly
    Kim, Seung-Soo
    Woo, Hee Chul
    Choi, Jae Hyung
    Suh, Dong Jin
    Kim, Jinsoo
    ENERGY, 2015, 93 : 1436 - 1446
  • [30] Study on Pyrolysis Reactor Development and Its Fast Pyrolysis Process in Converting Biomass into Bio-oil
    Chen, Yen-Chang
    Pan, Yung-Ning
    Hsieh, Kuo-Huang
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2011, 32 (03): : 219 - 225