Effect of Si on Microstructure and Corrosion Behavior of CoCrMo Alloys

被引：6
作者：
Peaubuapuan, Chonlawit [1 ]
Tunthawiroon, Phacharaphon [1 ]
Kanlayasiri, Kannachai [1 ]
Yuangyai, Chumpol [1 ]
机构：
[1] King Mongkuts Inst Technol Ladkrabang, Dept Ind Engn, Fac Engn, Bangkok 10520, Thailand
来源：
9TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MANUFACTURING (ICMM 2018) | 2018年 / 361卷
关键词：
WEAR BEHAVIOR; SIGMA-PHASE;
D O I：
10.1088/1757-899X/361/1/012004
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The aim of this research was to investigate the effect of silicon (Si) on the microstructure and corrosion behavior of CoCrMo alloys. The concentration of Si added in CoCrMo alloys was 0.1, 0.5 and 1 wt %. The corrosion behavior of the present alloys was investigated using potentiodynamic polarization measurements. The normal saline solution with 0.9 wt % was used as an electrolyte. Polarization curves obtained from the polarization test were used to evaluate in terms of corrosion current density (i(corr)), corrosion potential (E-corr) and corrosion parameters that be used to compute corrosion resistant property of CoCrMo alloys. The microstructure of a sample during the polarization test was compared using X-ray diffraction (XRD) and optical microscope (OM). The results indicated that the increase in Si slightly changed the microstructure of CoCrMo alloys and could enhance the resistance to corrosion of CoCrMo alloys in NaCl solution. In addition, the reduction of Cr and Mo concentration in CoCrMo alloys was found to be a significant influence on the decrease in corrosion resistance.
引用
收藏
页数：5
相关论文
共 13 条
[1]   Influence of metal carbides on dissolution behavior of biomedical CoCrMo alloy: SEM, TEM and AFM studies [J].
Bettini, Eleonora ;
Eriksson, Tom ;
Bostrom, Magnus ;
Leygraf, Christofer ;
Pan, Jinshan .
ELECTROCHIMICA ACTA, 2011, 56 (25) :9413-9419
[2]   Effects of microstructures on the sliding behavior of hot-pressed CoCrMo alloys [J].
Chen, Yan ;
Li, Yunping ;
Kurosu, Shingo ;
Yamanaka, Kenta ;
Tang, Ning ;
Chiba, Akihiko .
WEAR, 2014, 319 (1-2) :200-210
[3]   Effects of sigma phase and carbide on the wear behavior of CoCrMo alloys in Hanks' solution [J].
Chen, Yan ;
Li, Yunping ;
Kurosu, Shingo ;
Yamanaka, Kenta ;
Tang, Ning ;
Koizumi, Yuichiro ;
Chiba, Akihiko .
WEAR, 2014, 310 (1-2) :51-62
[4]   Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co-29Cr-6Mo alloys [J].
Chiba, Akihiko ;
Kumagai, Kazushige ;
Nomura, Naoyuki ;
Miyakawa, Satoru .
ACTA MATERIALIA, 2007, 55 (04) :1309-1318
[5]   Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys [J].
Giacchi, J. V. ;
Morando, C. N. ;
Fornaro, O. ;
Palacio, H. A. .
MATERIALS CHARACTERIZATION, 2011, 62 (01) :53-61
[6]   Passive and transpassive behaviour of CoCrMo in simulated biological solutions [J].
Hodgson, AWE ;
Kurz, S ;
Virtanen, S ;
Fervel, V ;
Olsson, COA ;
Mischler, S .
ELECTROCHIMICA ACTA, 2004, 49 (13) :2167-2178
[7]   Effect of Sigma Phase in Co-29Cr-6Mo Alloy on Corrosion and Mechanical Properties [J].
Kurosu, Shingo ;
Nomura, Naoyuki ;
Chiba, Akihiko .
ADVANCED MATERIALS AND PROCESSING, 2007, 26-28 :777-+
[8]   Influences of alloyed Si on the corrosion resistance of Co-Cr-Mo alloy to molten Al by iso-thermal oxidation in air [J].
Tunthawiroon, Phacharaphon ;
Li, Yunping ;
Chiba, Akihiko .
CORROSION SCIENCE, 2015, 100 :428-434
[9]   Development of new Co-Cr-W-based biomedical alloys: Effects of microalloying and thermomechanical processing on microstructures and mechanical properties [J].
Yamanaka, Kenta ;
Mori, Manami ;
Kuramoto, Koji ;
Chiba, Akihiko .
MATERIALS & DESIGN, 2014, 55 :987-998
[10]   Effects of Cu addition on the corrosion behavior of NiCoCrMo alloys in neutral chloride solution [J].
Yang, Biaobiao ;
Li, Jiaxiang ;
Gong, Xiaojuan ;
Nie, Yan ;
Li, Yunping .
RSC ADVANCES, 2017, 7 (65) :40779-40790
12