Unsteady flows of a highly loaded turbine blade with flat endwall and contoured endwall

被引:10
|
作者
Su, Xinrong [1 ]
Bian, Xiutao [1 ]
Li, Hui [1 ]
Yuan, Xin [1 ]
机构
[1] Tsinghua Univ, Key Lab Thermal Sci & Power Engn, Minist Educ, Beijing 100084, Peoples R China
关键词
Highly-loaded turbine blade; Endwall; Unsteady flow; DDES; Contoured endwall; Entropy generation rate; END WALL DESIGN; SECONDARY FLOWS; EDDY SIMULATION; TRAILING-EDGE; OPTIMIZATION; COMPUTATION; VORTEX; PERFORMANCE; GENERATION; CASCADE;
D O I
10.1016/j.ast.2021.106989
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
Strong secondary flow results in substantial aerodynamic loss for highly-loaded turbine. Accurate prediction of the complicated flow structures proposes challenges to the widely used Reynolds Average Navier-Stokes (RANS) approach. This work employs the hybrid RANS/Large Eddy Simulation (LES) method to study the unsteady flows for a highly-loaded turbine blade, with both flat endwall and optimized contoured endwall. Evolution of the unsteady flows in the endwall region is analyzed, with emphasis on the loss generation mechanism. Results show that for the flat endwall, the horseshoe vortex system is highly unsteady and is a significant source of unsteadiness in both the passage and the wake region. It contributes to the unsteady passage vortex, also the earlier breakdown of the trailing edge shedding vortex. The Probability Density Function (PDF) histogram of velocity in the wake region is bimodal, implying the perturbations from two mechanisms. For the contoured endwall, the unsteady evolution of the horseshoe vortex is blocked, which results in significantly reduced unsteadiness, also the merge between the horseshoe vortex with the passage vortex is prevented. Effect of the flow unsteadiness on the loss generation is assessed based on the entropy generation rates contributed by the time averaged flow and the fluctuations. The effect of unsteadiness is two-fold: unsteady perturbations trigger the vortex breakdown into small-scale structures and thus weakened wake velocity deficit and loss generation; however, in both the passage and the wake region the entropy generation by the fluctuations are remarkable. For the contoured endwall, due to the reduced flow unsteadiness, loss generation contributed by the fluctuations are much smaller compared to the flat endwall. The results highlight the importance of including the loss generation by the fluctuations, also a possible mechanism to reduce the secondary loss by attenuating the flow unsteadiness with the contoured endwall. (C) 2021 Elsevier Masson SAS. All rights reserved.
引用
收藏
页数:20
相关论文
共 50 条
  • [1] Analysis of Unsteady Tip and Endwall Heat Transfer in a Highly Loaded Transonic Turbine Stage
    Shyam, Vikram
    Ameri, Ali
    Chen, Jen-Ping
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 134 (04):
  • [2] ANALYSIS OF UNSTEADY TIP AND ENDWALL HEAT TRANSFER IN A HIGHLY LOADED TRANSONIC TURBINE STAGE
    Shyam, Vikram
    Ameri, Ali
    Chen, Jen-Ping
    PROCEEDINGS OF THE ASME TURBO EXPO 2010, VOL 4, PTS A AND B, 2010, : 645 - 656
  • [3] ENDWALL FILM COOLING EFFECTS ON SECONDARY FLOWS IN A CONTOURED ENDWALL NOZZLE VANE
    Barigozzi, Giovanna
    Franchini, Giuseppe
    Perdichizzi, Antonio
    Quattrore, Marco
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 4, PTS A AND B, 2008, : 955 - 965
  • [4] Endwall Film Cooling Effects on Secondary Flows in a Contoured Endwall Nozzle Vane
    Barigozzi, Giovanna
    Franchini, Giuseppe
    Perdichizzi, Antonio
    Quattrore, Marco
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2010, 132 (04): : 1 - 9
  • [5] Endwall film cooling effects on secondary flows in a contoured endwall nozzle vane
    Barigozzi, Giovanna
    Franchini, Giuseppe
    Perdichizzi, Antonio
    Quattrore, Marco
    Journal of Turbomachinery, 2010, 132 (04): : 1 - 9
  • [6] Effect of local concave non-axisymmetric endwall profiling on endwall secondary flows of a highly-loaded turbine cascade
    Cao, Zhiyuan
    Hao, Xinyu
    Gao, Xi
    Guo, Wei
    AEROSPACE SCIENCE AND TECHNOLOGY, 2024, 155
  • [7] PARAMETRIC OPTIMIZATION OF UNSTEADY ENDWALL BLOWING ON A HIGHLY LOADED LPT
    Benton, Stuart I.
    Bernardini, Chiara
    Bons, Jeffrey P.
    Sondergaard, Rolf
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 6A, 2013,
  • [8] UNCERTAINTY QUANTIFICATION OF HEAT TRANSFER FOR A HIGHLY LOADED GAS TURBINE BLADE ENDWALL USING POLYNOMIAL CHAOS
    Zhu, Peiyuan
    Yan, Yong
    Song, Liming
    Li, Jun
    Feng, Zhenping
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2C, 2016,
  • [9] A COMBINED APPLICATION OF NEGATIVE BOWED BLADE AND ENDWALL UNSTEADY PULSED HOLED SUCTION IN A HIGHLY LOADED COMPRESSOR CASCADE
    Chen, Shaowen
    Zhang, Hongxin
    Meng, Qinghe
    Wang, Songtao
    Wang, Zhongqi
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 2A, 2018,
  • [10] Effect of gas turbine endwall misalignment with slashface leakage on the blade endwall aerothermal performance
    Zhang, Kaiyuan
    Li, Zhigang
    Li, Jun
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 131 : 1247 - 1259