Rectangular Section Control Technology for Silicon Steel Rolling

Rectangular section control technology (RSCT) was introduced to achieve high-precision profile control during silicon steel rolling. The RSCT principle and method were designed, and the whole RSCT control strategy was developed. Specifically. RSCT included roll contour design, rolling technology optimization, and control strategy development, aiming at both hot strip mills (HSMs) and cold strip mills (CSMs). Firstly, through the high-per-formance variable crown (HVC) work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream:stands of HSMs, a hot strip with a stable crown and limited wedge, local spot, and single wave was obtained, which was suitable for cold rolling. Secondly, an approximately rectangular section was obtained by edge varying contact (EVC) work roll contour design, edge-drop setting,control, and closed loop control in the upper-stream stands of CSMs. Moreover, complex-mode flatness control was, realized by coordinating multiple shape-control methods in the downstream stands of CSMs. In addition, the RSCT approach was applied in several silicon-steel production plants, where an outstanding performance and remarkable economic benefits were observed.