Influence of graphene addition and sintering temperature on physical properties of Si3N4 matrix composites

The Si3N4-graphene composites (1 wt.% addition of graphene) were manufactured using powder metallurgy and consolidated using the Spark Plasma Sintering (SPS) method. In order to achieve composites with high mechanical properties, optimisation of a Si3N4 and Si3N4-graphene sintering temperatures were carried on for five and four different sintering temperatures respectively. Obtained samples were characterised by measurements of their density, hardness, fracture toughness and Young's modulus. Qualitative and quantitative phase composition was analysed by XRD diffraction. Microstructure analysis of sinters was also performed using Scanning Electron Microscopy (SEM). The highest relative density (99.31% and 99.32%) and fracture toughness (K-IC = 6.0 MPa*m(0.5)) was measured for samples sintered at 1650 degrees C and 1700 degrees C respectively, for Si3N4 and Si3N4-Gn composite. That shows no increase of fracture toughness between pure silicon nitride sinter and composite with 1% wt of graphene. Furthermore, XRD results showing 33% less of beta grains in Si3N4-Gn composite compared to pure Si3N4 sample, proving that graphene stabilise the alpha phase in silicon nitride. (C) 2016 Elsevier Ltd. All rights reserved.