Model for temperature profile estimation in the refractory of a metallurgical ladle

Modeling of the transient thermal state of metallurgical ladles is motivated by the need for estimating the drop in temperature of the liquid metal in the ladle. On-line estimation of the state is required, since the same ladle is used in a number of casting cycles with rapid changes in boundary conditions for the temperature field, and the conditions in the current as well as previous cycles affect the thermal state. Although a large number of methods for the numerical solution of conduction-diffusion partial differential equations have been developed, there are still advantages to keeping thermal field computations at a relatively simple level, in contrast to the situation in the design process of ladles, where two-dimensional modeling may be required. Extensive computations under nonverifiable boundary and initial parameter values are not especially suited for real-time simulation of industrial processes. This article presents a novel approach to the solution of the one-dimensional transient heat conduction problem applied to ladle linings, relying on classical analytical techniques in combination with numerical methods. The performance of the model was validated by a comparison of predictions to thermocouple measurements from the refractory of a steelmaking ladle during a campaign of 26 casting cycles. Reasonable agreement between the measured and simulated variables could be established, which demonstrates the feasibility of the approach.