Degradation of hyaluronan by ultrasonication in comparison to microwave and conventional heating

Hyaluronan (hyaluronic acid, HA) was depolymerised by ultrasonication (US), microwave irradiation (MW) and conventional heating (CH), and the effect of pH and oxidants was investigated. The degradation was followed by viscometry and size exclusion chromatography coupled with low-angle light scattering. The results demonstrated that depolymerisation of HA by US leveled off to a limiting molecular mass, and the degradation was significantly enhanced by acidic and alkaline pH only in the presence of oxidants. In contrast to US, the course of depolyrnerisation by MW was strongly pH-dependent, and the degradation rate increased with decreasing pH. The expected enhancement of depolymerisation by MW in comparison to CH was marked only at very short heating time at pH <4. The NMR and FTIR spectral analyses indicated that HA in the whole M-w-range studied retained almost the backbone of the parent polysaccharide independently on the degradation method used. At harsh degradation conditions (long-term treatments, particularly at acidic pH or alkaline pH and in presence of oxidants) the depolymerisation was accompanied by destruction of both constituent sugar residues and formation of unsaturated structures detectable by UV-absorption at 230-240 and 260-270 nm. US-assisted oxidative degradation under mild reaction conditions was shown to be the most appropriate procedure to reduce the molecular mass of HA to similar to 100 kDa without significant chemical modification of the polysaccharide. (C) 2005 Elsevier Ltd. All rights reserved.