Microstructural evolution in 42CrMo steel during compression at elevated temperatures

被引：116

作者：

Lin, Y. C. ^{[1
]}

Chen, Ming-Song ^{[1
]}

Zhong, Jue ^{[1
]}

机构：

[1] Cent S Univ, Sch Mech & Elect Engn, Changsha 410083, Peoples R China

来源：

MATERIALS LETTERS | 2008年 / 62卷 / 14期

基金：

中国博士后科学基金;

关键词：

metals and alloys; microstructure; 42CrMo steel; processing parameters; grain size;

D O I：

10.1016/j.matlet.2007.11.032

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to study the workability and to optimize the processing parameters for 42CrMo steel hot forming, the hot compressive tests of 42CrMo steel were performed in the temperature range of (850-1150) degrees C at strain rates of (0.0 1 -50) s(-1) and deformation degrees of (10-60)% on Gleeble-1500 thermo-simulation machine. The effects of processing parameters, including the strain rate, forming temperature and deformation degree, on the microstructures of 42CrMo steel were investigated by metallurgical analysis. The results show that the aver-age grain size of the deformed 42CrMo steel increases with the forming temperature and decreases with the deformation degree and strain rate. In a word, the grain size of hot compressive 42CrMo steel is dependent on the forming temperature, strain and strain rate, also on Zener-Hollomon parameter. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：2132 / 2135

页数：4

共 14 条

[1] Workability of Ti-6Al-4V alloy at high temperatures and strain rates [J].

Bruschi, S ;

Poggio, S ;

Quadrini, F ;

Tata, ME .

MATERIALS LETTERS, 2004, 58 (27-28) :3622-3629

[2] EBSD study on the formation of fine ferrite grains in plain carbon steel during warm deformation [J].

Eghbali, B. .

MATERIALS LETTERS, 2007, 61 (18) :4006-4010

[3] The microstructural evolution of an Al-Zn-Mg-Cu alloy during homogenization [J].

Fan, XG ;

Jiang, DM ;

Meng, QC ;

Zhong, L .

MATERIALS LETTERS, 2006, 60 (12) :1475-1479

[4] Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures [J].

Holzapfel, H ;

Schulze, V ;

Vohringer, O ;

Macherauch, E .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 248 (1-2) :9-18

[5] Evolution mechanism of grain refinement based on dynamic recrystallization in multiaxially forged austenite [J].

Huang, J ;

Xu, Z .

MATERIALS LETTERS, 2006, 60 (15) :1854-1858

[6] Study on constitutive relation of AISI 4140 steel subject to large strain at elevated temperatures [J].

Kim, SI ;

Lee, Y ;

Byon, SM .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 :84-89

[7] Prediction of dynamic recrystallisation behaviour of AISI type 4140 medium carbon steel [J].

Kim, SI ;

Yoo, YC .

MATERIALS SCIENCE AND TECHNOLOGY, 2002, 18 (02) :160-164

[8] Prediction of 42CrMo steel flow stress at high temperature and strain rate [J].

Lin, Y. C. ;

Chen, Ming-Song ;

Zhong, Jue .

MECHANICS RESEARCH COMMUNICATIONS, 2008, 35 (03) :142-150

[9]

LIN YC, UNPUB COMPUT MAT SCI

[10] Investigation on hot deformation behavior of AISI T1 high-speed steel [J].

Liu, JT ;

Chang, HB ;

Wu, RH ;

Hsu, TY ;

Ruan, XY .

MATERIALS CHARACTERIZATION, 2000, 45 (03) :175-186

← 1 2 →