Boriding of Binary Ni-Ti and Ternary Ni-Ti-Cu Shape Memory Alloys

被引：1

作者：

Ucar, N. ^{[1
]}

Turku, N. ^{[1
]}

Ozdemir, A. F. ^{[1
]}

Calik, A. ^{[2
]}

机构：

[1] Suleyman Demirel Univ, Fac Arts & Sci, Dept Phys, Isparta, Turkey

[2] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, Isparta, Turkey

来源：

ACTA PHYSICA POLONICA A | 2016年 / 130卷 / 01期

关键词：

MECHANICAL-PROPERTIES; WEAR BEHAVIOR; CAST IRONS; THIN-FILMS; STEELS; KINETICS;

D O I：

10.12693/APhysPolA.130.492

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

In this work, the boriding of binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was carried out in a solid medium at 1173 K for 8 h using the powder pack method with Ekabor-Ni powders. Characterization of boride layer formed on the surface of alloys was identified by optical microscopy and scanning electron microscopy. TiB2, NiB2 and SiC phases in the boride layer of borided binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was confirmed by X-ray diffraction analysis. The microhardness and thickness of the boride layers were measured. The obtained hardness values show a hardness anomaly due to porosity and structural defects with increase of Cu content, while a decrease in the value of hardness moving from the boride layer to main structure was observed.

引用

页码：492 / 495

页数：4

共 50 条

[31] Ni-Ti Shape Memory Alloy Coatings for Structural Applications: Optimization of HVOF Spraying Parameters
De Crescenzo, Carmen
Karatza, Despina
Musmarra, Dino
Chianese, Simeone
Baxevanis, Theocharis
Dalla, Panagiota T.
Exarchos, Diumitrios A.
Dassios, Konstantinos G.
Matikas, Theodore E.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
[32] Effects of Mo Content on Surface Characteristics of Dental Ni-Ti Alloys
Choe, Han-Cheol
Kim, Jae-Un
Park, Sun-Kyun
CORROSION SCIENCE AND TECHNOLOGY-KOREA, 2023, 22 (01): : 64 - 72
[33] Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys
Han, X. L.
Song, K. K.
Zhang, L. M.
Xing, H.
Sarac, B.
Spieckermann, F.
Maity, T.
Muehlbacher, M.
Wang, L.
Kaban, I.
Eckert, J.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (03) : 1005 - 1015
[34] Effect of low temperature annealing on the properties of nano Ni-Ti alloys
Mukunda, Sriram
Vinyas, M.
Narendranath, S.
Herbert, Mervin A.
MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
[35] Effect of Stoichiometry on Shape Memory Properties of Ti-Ni-Hf-Cu-Nb Shape Memory Alloys Manufactured by Suspended Droplet Alloying
Li, Sheng
Wang, Minshi
Essa, Khamis
Gan, Chunlei
Liu, Chunyan
Attallah, Moataz
SOLIDS, 2022, 3 (01): : 1 - 21
[36] Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys
X. L. Han
K. K. Song
L. M. Zhang
H. Xing
B. Sarac
F. Spieckermann
T. Maity
M. Mühlbacher
L. Wang
I. Kaban
J. Eckert
Journal of Materials Engineering and Performance, 2018, 27 : 1005 - 1015
[37] An effective approach to produce a nanocrystalline Ni-Ti shape memory alloy without severe plastic deformation
Park, Chan Hee
Han, S. H.
Kim, Seong-Woong
Hong, Jae-Keun
Nam, Tae-Hyun
Yeom, Jong-Taek
JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 654 : 379 - 383
[38] Development of sputtered Shape Memory Alloy (SMA) Ni-Ti films for actuation in ice cooled environments
Martins, Rui M. S.
Schell, Norbert
Gordo, Paulo R.
Maneira, Manuel J. P.
Silva, Rui J. C.
Braz Fernandes, Francisco M.
VACUUM, 2009, 83 (10) : 1299 - 1302
[39] Research Progress on Biomedical Ni-Free Ti Based Shape Memory Alloys
Cui Yan
Li Yan
Luo Kun
Xu Huibin
RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (09) : 1682 - 1686
[40] Design and Development of Ti-Ni, Ni-Mn-Ga and Cu-Al-Ni-based Alloys with High and Low Temperature Shape Memory Effects
Pushin, Vladimir
Kuranova, Nataliya
Marchenkova, Elena
Pushin, Artemy
MATERIALS, 2019, 12 (16)

← 1 2 3 4 5 →