Boriding of Binary Ni-Ti and Ternary Ni-Ti-Cu Shape Memory Alloys

被引：1
|
作者：
Ucar, N. [1 ]
Turku, N. [1 ]
Ozdemir, A. F. [1 ]
Calik, A. [2 ]
机构：
[1] Suleyman Demirel Univ, Fac Arts & Sci, Dept Phys, Isparta, Turkey
[2] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, Isparta, Turkey
来源：
ACTA PHYSICA POLONICA A | 2016年 / 130卷 / 01期
关键词：
MECHANICAL-PROPERTIES; WEAR BEHAVIOR; CAST IRONS; THIN-FILMS; STEELS; KINETICS;
D O I：
10.12693/APhysPolA.130.492
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
In this work, the boriding of binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was carried out in a solid medium at 1173 K for 8 h using the powder pack method with Ekabor-Ni powders. Characterization of boride layer formed on the surface of alloys was identified by optical microscopy and scanning electron microscopy. TiB2, NiB2 and SiC phases in the boride layer of borided binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was confirmed by X-ray diffraction analysis. The microhardness and thickness of the boride layers were measured. The obtained hardness values show a hardness anomaly due to porosity and structural defects with increase of Cu content, while a decrease in the value of hardness moving from the boride layer to main structure was observed.
引用
收藏
页码：492 / 495
页数：4
相关论文
共 50 条
  • [1] Boriding of Binary Ni-Ti Shape Memory Alloys
    Ucar, Nazim
    Dogan, Sule
    Karakas, Mustafa Serdar
    Calik, Adnan
    ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES, 2016, 71 (11): : 1017 - 1020
  • [2] Microstructure and transformation temperatures of Si-added Ni-Ti-Cu and Ni-Ti-Zr shape memory alloys
    Kim, Jeongsoo
    Kim, Yongjoo
    Kim, Wontae
    Park, Eunsoo
    Kim, Dohyang
    JOURNAL OF MATERIALS SCIENCE, 2025, 60 (03) : 1535 - 1544
  • [3] Isothermal and athermal martensitic transformations in Ni-Ti shape memory alloys
    Kustov, S.
    Salas, D.
    Cesari, E.
    Santamarta, R.
    Van Humbeeck, J.
    ACTA MATERIALIA, 2012, 60 (6-7) : 2578 - 2592
  • [4] Bayesian probabilistic prediction of precipitation behavior in Ni-Ti shape memory alloys
    Honarmandi, P.
    Johnson, L.
    Arroyave, R.
    COMPUTATIONAL MATERIALS SCIENCE, 2020, 172
  • [5] Diffusion Kinetics of Binary Ti-Ni Shape Memory Alloys
    Ucar, N.
    Dogan, S.
    Ozdemir, A. F.
    Karakas, S.
    Calik, A.
    ACTA PHYSICA POLONICA A, 2017, 132 (03) : 524 - 526
  • [6] Ni-Ti(-Cu) shape memory alloy interlayers supporting low friction functional coatings
    Callisti, M.
    Danek, M.
    Yasuda, K.
    Evaristo, M.
    Tichelaar, F. D.
    Cavaleiro, A.
    Polcar, T.
    TRIBOLOGY INTERNATIONAL, 2015, 88 : 135 - 142
  • [7] Nuclear magnetic resonance studies of martensitic phase transformation in Ni-Ti shape memory alloys
    Crevoiserat, S
    Dimitropoulos, C
    Gotthardt, R
    MATERIALS TRANSACTIONS, 2002, 43 (05) : 785 - 791
  • [8] Shape memory properties of highly textured Cu-Al-Ni-(Ti) alloys
    Sobrero, C. E.
    La Roca, P.
    Roatta, A.
    Bolmaro, R. E.
    Malarria, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 536 : 207 - 215
  • [9] A metallurgical characterization of ten endodontic Ni-Ti instruments: assessing the clinical relevance of shape memory and superelastic properties of Ni-Ti endodontic instruments
    Zinelis, S.
    Eliades, T.
    Eliades, G.
    INTERNATIONAL ENDODONTIC JOURNAL, 2010, 43 (02) : 125 - 134
  • [10] Effect of Mo on the Microstructure and Superelasticity of Ti-Ni-Cu Shape Memory Alloys
    Zhao, Guangwei
    Chen, Jian
    Fang, Dong
    Ye, Yongsheng
    Huang, Caihua
    Ye, Xicong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (01) : 617 - 626
12345