An investigation of the effect of SiC reinforcement coating on the wettability of Al/SiC system

被引：27
作者：
Tekmen, C. [1 ]
Saday, F. [1 ]
Cocen, U. [1 ]
Ljungberg, L. Y. [2 ]
机构：
[1] Dokuz Eylul Univ, TR-35160 Izmir, Turkey
[2] Univ Skovde, SE-54128 Skovde, Sweden
来源：
JOURNAL OF COMPOSITE MATERIALS | 2008年 / 42卷 / 16期
关键词：
wettability; contact angle; Al-SiC; Sol-gel; electroless nickel; coating;
D O I：
10.1177/0021998308092217
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In this study, the wetting behavior of oxide and metallic coated SiC substrate with Al-Si-Mg alloy has been investigated. SiC substrate and particles were coated with SiO(2), TiO(2), and metallic Ni by using thermo-chemical treatment, sol-gel and electroless coating techniques, respectively. Also, the effect of doping elements (Ni, Cu and Fe in TiO2 coating) on the wettability has been investigated. Coatings were characterized by SEM, EDS, XRD, and by means of surface roughness. Contact angle results demonstrate that metallic Ni coating significantly improves the wettability. However, doping elements did not alter the results due to their detrimental effect on surface roughness.
引用
收藏
页码：1671 / 1679
页数：9
相关论文
共 22 条
  • [1] Wettability of transition metal oxide surfaces
    Feng, AG
    McCoy, BJ
    Munir, ZA
    Cagliostro, D
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 242 (1-2): : 50 - 56
  • [2] The enhancement of wettability of SiC particles in cast aluminium matrix composites
    Hashim, J
    Looney, L
    Hashmi, MSJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 119 (1-3) : 329 - 335
  • [3] The wettability of SiC particles by molten aluminium alloy
    Hashim, J
    Looney, L
    Hashmi, MSJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 119 (1-3) : 324 - 328
  • [4] Wettability of nickel coated graphite by aluminum
    Ip, SW
    Sridhar, R
    Toguri, JM
    Stephenson, TF
    Warner, AEM
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 244 (01): : 31 - 38
  • [5] The incorporation of ceramic particles in molten aluminium and the relationship to contact angle data
    Kennedy, AR
    Karantzalis, AE
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 264 (1-2): : 122 - 129
  • [6] Review of non-reactive and reactive wetting of liquids on surfaces
    Kumar, Girish
    Prabhu, K. Narayan
    [J]. ADVANCES IN COLLOID AND INTERFACE SCIENCE, 2007, 133 (02) : 61 - 89
  • [7] Control of the interface in SiC/Al composites
    Lee, JC
    Ahn, JP
    Shim, JH
    Shi, ZL
    Lee, HI
    [J]. SCRIPTA MATERIALIA, 1999, 41 (08) : 895 - 900
  • [8] Particle degradation during remelting of Al-1% Mg alloy reinforced with SICp coated with sol-gel-produced TiO2
    Lefebvre, LP
    LEsperance, G
    Suery, M
    [J]. JOURNAL OF MATERIALS SCIENCE, 1997, 32 (15) : 3987 - 3994
  • [9] The influence of nickel coating on the wettability of aluminum on ceramics
    León, CA
    Drew, RAL
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (10) : 1429 - 1432
  • [10] LIBO L, 2006, SURF COAT TECH, V200, P5102
123