CURING CHARACTERISTICS OF LOW EMISSION UREA-FORMALDEHYDE ADHESIVE IN THE PRESENCE OF WOOD

被引:0
|
作者
Popovic, Mladjan [1 ]
Miljkovic, Jovan [1 ]
Simendic, Jaroslava Budinski [2 ]
Pavlicevic, Jelena [2 ]
Ristic, Ivan [2 ]
机构
[1] Univ Belgrade, Fac Forestry, Belgrade 11030, Serbia
[2] Univ Novi Sad, Fac Technol, Novi Sad 21000, Serbia
关键词
Adhesives; wood-based panels; infrared spectroscopy; differential scanning calorimetry; wood flour; THERMAL-ANALYSIS; RESIN; BEHAVIOR; KINETICS; TIME;
D O I
暂无
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
Urea-formaldehyde (UF) resin presents, by far, the most utilized adhesive system in the manufacture of particleboard and fiberboard. At the temperatures above 100 degrees C in the presence of catalyst, this resin undergoes cross-linking reaction and bonding of wood particles in a hot press. In this work the cross-linking of the new type of commercial UF adhesive for E1 type of wood based panels was studied using infra red (IR) spectroscopy and differential scanning calorimetry (DSC). IR spectra of examined UF adhesive showed distinctive characteristics in comparison to the older types of UF adhesives. The influence of different industrial wood species (obtained from beech, fir and poplar) on the curing behavior of wood-flour/adhesive mixtures has been evaluated using DSC method. The peak temperature and enthalpy of the curing reaction were evaluated from scans obtained with different heating rates. The activation energy for the curing reaction of pure adhesive and for wood-flour/adhesive mixtures was calculated using the Kissinger method.
引用
收藏
页码:589 / 599
页数:11
相关论文
共 50 条
  • [21] Manufacturing Particleboard Using Hemp Shiv and Wood Particles with Low Free Formaldehyde Emission Urea-Formaldehyde Resin
    Li, Xiaoping
    Wang, Siqun
    Du, Guanben
    Wu, Zhangkang
    Gong, Yingchun
    FOREST PRODUCTS JOURNAL, 2014, 64 (5-6) : 187 - 191
  • [22] INFLUENCE OF HARDENER SYSTEMS AND WOOD ON THE FORMALDEHYDE EMISSION FROM UREA-FORMALDEHYDE RESIN AND PARTICLEBOARDS
    ELBERT, AA
    HOLZFORSCHUNG, 1995, 49 (04) : 358 - 362
  • [23] CURING OF UREA-FORMALDEHYDE OLIGOMERS OF CYCLIC STRUCTURE
    PSHENITSYNA, VP
    MOLOTKOVA, NN
    SMIRNOVA, LN
    PUKHOVITSKAYA, AN
    POTEKHINA, YS
    EKSANOVA, ND
    VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A, 1984, 26 (07): : 1463 - 1465
  • [24] Influence of glyoxal on curing of urea-formaldehyde resins
    Perminova, Daria A.
    Malkov, Viktor S.
    Guschin, Viktor
    Eisenreich, Norbert
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2019, 92 : 1 - 6
  • [25] Curing of urea-formaldehyde resins on awood substrate
    K. Siimer
    T. Kaljuvee
    P. Christjanson
    I. Lasn
    Journal of Thermal Analysis and Calorimetry, 2006, 84 : 71 - 77
  • [26] Usage of the New Modifier-curing Agent in Plywood Technology: The Influence to Urea-formaldehyde Resin Curing and Formaldehyde Emission
    Ivanov, Daniil
    Ekaterincheva, Mariya
    Kalashnikov, Aleksey
    Baca, Ksenya
    Mazur, Anton
    PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING, 2023, 67 (03) : 386 - 395
  • [27] Rheological behavior of urea-formaldehyde adhesive resins
    Christjanson, O
    Suurpere, A
    Siimer, K
    MATERIALS RESEARCH INNOVATIONS, 2005, 9 (01) : 7 - 8
  • [28] Rheological behaviour of urea-formaldehyde adhesive resins
    Christjanson, P
    Suurpere, A
    Siimer, K
    E-POLYMERS, 2004,
  • [29] Influence of process variables on the reactivity of low formaldehyde emission urea-formaldehyde resin
    Han, Tang Lee
    Kumar, R. N.
    Rozman, H. D.
    Daud, Wan Rosli Wan
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2008, 47 (06) : 551 - 557
  • [30] Study on Curing Behavior of Low Molar Ratio Urea-formaldehyde Resins with Different Curing Agents
    Dong Yaohui
    Gao Qiang
    Zhang Yue
    Li Jianzhang
    ADVANCES IN COMPOSITES, PTS 1 AND 2, 2011, 150-151 : 965 - 968