The development of a novel, microwave assisted, half-warm mixed asphalt

被引:16
作者
Dulaimi, Anmar [1 ,2 ,3 ]
Al-Busaltan, Shakir [4 ]
Sadique, Monower [3 ]
机构
[1] Univ Warith Al Anbiyaa, Coll Engn, Karbala, Iraq
[2] Minist Educ, Karbala, Iraq
[3] Liverpool John Moores Univ, Sch Civil Engn & Built Environm, Liverpool, Merseyside, England
[4] Univ Kerbala, Coll Engn, Dept Civil Engn, Karbala, Iraq
关键词
Cold mix asphalt; Half-warm mix asphalt; Microwave heating; Stiffness modulus; Sustainability; Waste fillers; Wheel track test; MECHANICAL-PROPERTIES; EMULSION MIXTURES; COLD; CONCRETE; HYDRATION; CEMENT; MICROSTRUCTURE; TEMPERATURE; BEHAVIOR; PAVEMENT;
D O I
10.1016/j.conbuildmat.2021.124043
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Global warming is an imminent threat that the world and its inhabitants have to confront. As such, it is the duty of the pavement industry as a contributor of greenhouse gas emissions, to pave the way by lowering its carbon footprint. It is vital that new measures are adopted in order to do so such as employing the use of emulsion-based mixtures (EBM). The problem with this is that the performance properties of such mixtures are inferior to that of traditional hot mix asphalts (HMAs). The air void content of EBM is very high and considered unacceptable by road engineers for application as a surface layer. That said, these mixtures are not only environmentally friendly but also boast ecological and economic advantages. An innovate approach was applied in this research by using a pre-compaction microwave processing technique to develop a novel, half-warm mix asphalt mixture (H-WM). This new mix was shown to have improved mechanical properties and lower air void content. EBM mixtures comprised of cementitious binary blended filler, were prepared using microwave heating applied over different lengths of time. Stiffness modulus, air voids content and temperature were used to establish the optimum microwave radiation time. The results indicated that 1.5 min of microwave processing decreased air void content from 8.92% to 7.12%. A 7% improvement in stiffness modulus was also found and the temperature was within lower limits (43 degrees C). Hydration was accelerated by the microwave radiation, and the demulsification of bitumen emulsion was promoted. Microwave processing was found to have a positive impact on permanent deformation at elevated temperatures in comparison to the two reference HMAs used. It also proved to be an adequate technique to produce a fast-curing H-WM with lower air voids content. Water damage resistance for the microwaved H-WM (99%) is better than the reference HMA mixes. The findings of this study show that the novel half-warm asphalt mixture has superior properties in comparison to EBM. (c) 2021 Elsevier Ltd. All rights reserved.
引用
收藏
页数:12
相关论文
共 104 条
[1]   High temperature characteristics of warm mix asphalt mixtures with nanoclay and chemical warm mix asphalt modified binders [J].
Abdullah, Mohd Ezree ;
Zamhari, Kemas Ahmad ;
Hainin, Mohd Rosli ;
Oluwasola, Ebenezer Akin ;
Yusoff, Nur Izzi Md. ;
Hassan, Norhidayah Abdul .
JOURNAL OF CLEANER PRODUCTION, 2016, 122 :326-334
[2]  
Al Nageim H., 2016, P 38 INT C CEM MICR, P167
[3]   A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials [J].
Al Nageim, Hassan ;
Al-Busaltan, Shakir Falih ;
Atherton, William ;
Sharples, George .
CONSTRUCTION AND BUILDING MATERIALS, 2012, 36 :743-748
[4]   Mechanical Properties of an Upgrading Cold-Mix Asphalt Using Waste Materials [J].
Al-Busaltan, Shakir ;
Al Nageim, Hassan ;
Atherton, William ;
Sharples, George .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2012, 24 (12) :1484-1491
[5]   Green Bituminous Asphalt relevant for highway and airfield pavement [J].
Al-Busaltan, Shakir ;
Al Nageim, Hassan ;
Atherton, William ;
Sharples, George .
CONSTRUCTION AND BUILDING MATERIALS, 2012, 31 :243-250
[6]  
Al-Kafaji M., 2020, MS E, V737
[7]  
AL-KHAFAJI Z. S., 2018, INT J CIVIL ENG TECH, V9, P522
[8]   Durability of concrete incorporating GGBS activated by water-glass [J].
Al-Otaibi, Saud .
CONSTRUCTION AND BUILDING MATERIALS, 2008, 22 (10) :2059-2067
[9]   Mechanical and Microstructural Study of RAP-Clay Composites Containing Bitumen Emulsion and Lime [J].
Alizadeh, Abbas ;
Modarres, Amir .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2019, 31 (02)
[10]  
Asphalt Institute, 2015, MS 2 ASPH MIX DES ME, V7th