Sensorless Control of Permanent Magnet Synchronous Motor Based on Improved Model Reference Adaptive System

被引:0
|
作者
Wei, Fan [1 ]
Wang, Yong [1 ]
Liang, Qiongwen [1 ]
Li, Zongyang [1 ]
机构
[1] Univ Sci & Technol China, Dept Automat, Hefei, Peoples R China
来源
2019 CHINESE AUTOMATION CONGRESS (CAC2019) | 2019年
关键词
Permanent Magnet Synchronous Motor; Sensorless Control; Model Reference Adaptive System; Sliding Mode Controller;
D O I
10.1109/cac48633.2019.8997491
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
In order to improve the accuracy of rotor position estimation and speed tracking in sensorless vector control system of permanent magnet synchronous motor(PMSM), an adaptive full-order observer is proposed based on model reference adaptive system(MRAS) method. This method combines the estimation equation and the calibration link to form the closedloop estimation by introducing the correction term. The sliding mode controller(SMC) is used to control the rotation speed loop instead of the traditional PI controller to improve the anti-disturbance ability of the system. The simulation results show that the improved model reference adaptive system method can better estimate the rotation speed and rotor position in the case of motor startup, sudden change of speed and sudden change of the load torque. The method has good stability and robustness.
引用
收藏
页码:2422 / 2426
页数:5
相关论文
共 50 条
  • [11] Parameter Identification of a Permanent Magnet Synchronous Motor Based on the Model Reference Adaptive System with Improved Active Disturbance Rejection Control Adaptive Law
    Qi, Xin
    Sheng, Chunyang
    Guo, Yongbao
    Su, Tao
    Wang, Haixia
    APPLIED SCIENCES-BASEL, 2023, 13 (21):
  • [12] Sensorless Control of Permanent Magnet Synchronous Motor Based on the Improved Sliding Mode Observer
    Hua Z.
    Dou M.
    Zhao D.
    Yan L.
    Ji J.
    Yang J.
    Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University, 2018, 36 (04): : 754 - 760
  • [13] Sensorless Control Using Model Reference Adaptive System Based on Power Balance Model for High-speed Permanent Magnet Synchronous Motor
    Cui, Yazhi
    Wu, Min
    Huang, Xiaoyan
    2022 25TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2022), 2022,
  • [14] Sensorless control of fault-tolerant permanent magnet vernier rim-driven motor based on improved model reference adaptive system
    Zhao, Tianrui
    Zhu, Jingwei
    Liu, Qing
    Wu, Jun
    Cai, Yaqian
    JOURNAL OF POWER ELECTRONICS, 2024, : 687 - 697
  • [15] Multi-sliding mode current disturbance suppression scheme based model reference adaptive system for sensorless control of permanent magnet synchronous motor
    Zhang, Sai
    Shen, Anwen
    Luo, Xin
    Tang, Qipeng
    Li, Zicheng
    ISA TRANSACTIONS, 2023, 137 : 615 - 628
  • [16] Model Reference Adaptive System Based Adaptive Speed Estimation for Sensorless Vector Control with Initial Rotor Position Estimation for Interior Permanent Magnet Synchronous Motor Drive
    Khlaief, Amor
    Boussak, Mohamed
    Gossa, Moncef
    ELECTRIC POWER COMPONENTS AND SYSTEMS, 2013, 41 (01) : 47 - 74
  • [17] Nonlinear Flux Linkage Observer with Model Reference Adaptive System for Improved Permanent Magnet Synchronous Motor Control
    Zhu, Shaopeng
    Hu, Kaida
    Lin, Jian
    Liu, Yongqing
    Chen, Huipeng
    Wang, Weiyang
    Gao, Jian
    ACTUATORS, 2024, 13 (10)
  • [18] Sensorless Control Strategy for Permanent Magnet Synchronous Motor Integral Adaptive Observer
    Wang, Zhonggen
    Zhu, Xiaobing
    Nie, Wenyan
    IEEJ JOURNAL OF INDUSTRY APPLICATIONS, 2025, 14 (01) : 120 - 130
  • [19] Sensorless adaptive PID speed control for Permanent magnet synchronous motor drives
    Geethu, M.
    Kunjumon, P. G.
    IEEE INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGICAL TRENDS IN COMPUTING, COMMUNICATIONS AND ELECTRICAL ENGINEERING (ICETT), 2016,
  • [20] Sensorless control of permanent magnet synchronous motor based on adaptive back-EMF observer
    Cao, Xiangang
    Ye, Yu
    Duan, Yong
    Wu, Yuze
    Yang, Xin
    ADVANCES IN MECHANICAL ENGINEERING, 2023, 15 (02)