Single-Frequency and Single-Polarization DFB Fiber Laser Based on Tapered FBG and Self-Injection Locking

A stable single-polarization narrow linewidth single-frequency distributed feedback (DFB) fiber laser is proposed and demonstrated. For the first time, to our knowledge, the tapered FBG written in the photosensitive large-mode-area (LMA) high-concentration erbium-doped fiber (EDF) is applied in the DFB fiber laser. Self-injection locking is used to make the proposed DFB fiber laser operate in the stable single-polarization state and reduce the linewidth of the DFB fiber laser. The LMA high-concentration EDF is fabricated by the modified chemical vapor deposition technique. The tapered FBG can be seen as the equivalent phase shift FBG, and the equivalent pi phase shift is produced by tapering the uniform FBG directly. The threshold of the DFB fiber laser is about 145 mW, and the maximum output power is 43.55 mW at 450-mW pump power. The measured and modified slope efficiencies of the DFB fiber laser are approximately 14.27% and 15.82%, and the optical signal-to-noise ratio (OSNR) of the laser is over 55 dB. The stable single-polarization and single-frequency operation of the fiber laser is realized, and the measured 20-dB linewidth of DFB fiber laser with self-injection locking and without self-injection locking are approximately 10.3 and 52.3 kHz, respectively.