Kinetics of aluminum extraction from aluminum ash by leaching with sulfuric acid

To explore the high value of aluminum ash development and utilization, factors (granularity of aluminum ash, leaching temperature, leaching time, sulfuric acid concentration, and liquid solid ratio) affecting the leaching rate of aluminum were evaluated. The kinetics of the leaching process was also investigated. The results indicate that the leaching rate of aluminum in aluminum ash can reach 88.9% under the following conditions: leaching temperature, 100 degrees C; leaching time, 120 min; sulfuric acid concentration, 2.5 mol/L; and liquid-solid ratio (mass ratio), 1.3:1. Studies on the leaching dynamics of aluminum in aluminum ash showed that leaching was divided into two stages. At the initial stage (i.e. at the leaching rate x <= 0.3), the external diffusion resistance and the diffusion resistance of the solid product layer are negligible, and leaching is controlled by chemical reaction at the interface. The apparent activation energy was 5733.25 J/mol. At the leaching rate x = 0.3-0.9, the leaching rate was controlled by the non-steady diffusion of the liquid film in the porous solid by the fluid reactant H2SO4. The apparent activation energy was 25390.87 J/mol.