Flexural and impact properties of kenaf/glass hybrid composite metal laminates

被引：0
|
作者：
Feng, Ng Lin [1 ]
Subramaniam, Kathiravan [1 ]
Malingam, Sivakumar Dhar [1 ]
Bapokutty, Omar [2 ]
Sambu, M. [3 ]
机构：
[1] Univ Tekn Malaysia Melak, Fac Mech Engn, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Tekn Malaysia Melak, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia
[3] Nilai Univ, Fac Engn & Technol, Dept Mech, Durian Tunggal 76100, Melaka, Malaysia
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD) | 2018年
关键词：
Fibre metal laminates; hybrid composite; natural fibres;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper presents the study on flexural and impact properties of kenaf/ glass hybrid fibre reinforced metal laminates with different fibre stacking configurations. Two types of hybrid stacking configuration were prepared using hot compression method. Non-hybrid glass fibre reinforced metal laminates were also prepared for comparison. The flexural test was conducted according to ASTM D790 while the Charpy impact test was conducted according to ASTM E23. From the results, it was found that the composites with glass plies as the outer layer (H1) exhibited a positive hybrid effect towards flexural and impact properties compared to non-hybrid glass fibre reinforced metal laminates.
引用
收藏
页码：195 / 196
页数：2
相关论文
共 50 条
  • [1] SYNERGISTIC EFFECT ON FLEXURAL PROPERTIES OF KENAF-GLASS HYBRID COMPOSITE
    Afdzaluddin, Atiqah
    Maleque, Md Abdul
    Iqbal, Mohammed
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 2012, 626 : 989 - +
  • [2] Tensile and fatigue properties of hybrid kenaf/glass fibre reinforced metal laminates
    Feng, Ng Lin
    Malingam, Sivakumar Dhar
    Ab Ghani, Ahmad Fuad
    Selamat, Mohd Zulkefli
    Subramaniam, Kathiravan
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 191 - 192
  • [3] Flexural properties of symmetric carbon and glass fibre reinforced hybrid composite laminates
    Dong, Chensong
    COMPOSITES PART C: OPEN ACCESS, 2020, 3
  • [4] Open Hole Tensile Properties of Kenaf Composite and Kenaf/Fibreglass Hybrid Composite Laminates
    Salleh, Z.
    Berhan, M. N.
    Hyie, Koay Mei
    Taib, Y. M.
    Kalam, A.
    Roselina, N. R. Nik
    INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 2013, 68 : 399 - 404
  • [5] Low-velocity Impact Performance of Glass Fiber, Kenaf Fiber, and Hybrid Glass/Kenaf Fiber Reinforced Epoxy Composite Laminates
    Majid, Dayang Laila
    Jamal, Qistina Mohd
    Manan, Nor Hafizah
    BIORESOURCES, 2018, 13 (04): : 8839 - 8852
  • [6] Flexural Properties and Impact Strength of Kenaf-Glass Fiber Unsaturated Polyester Hybrid Composites
    Zhafer, S. F.
    Rozyanty, A. R.
    Shahnaz, S. B. S.
    Musa, L.
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY V, 2017, 1835
  • [7] IMPACT RESISTANCE PROPERTIES OF KEVLAR/GLASS FIBER HYBRID COMPOSITE LAMINATES
    Shaari, Norazean
    Jumahat, Aidah
    Razif, M. Khafiz M.
    JURNAL TEKNOLOGI, 2015, 76 (03): : 93 - 99
  • [8] Flexural properties of recycled polystyrene composite laminates reinforced with MWCNT filled kenaf fiber
    Rejab, Nik Akmar
    Akindoyo, John Olabode
    Jaafar, Mariatti
    MATERIALS TODAY-PROCEEDINGS, 2022, 66 : 2900 - 2903
  • [9] Flexural and Compressive Properties of Hybrid Kenaf/Silica Nanoparticles in Epoxy Composite
    Bajuri, Farid
    Mazlan, Norkhairunnisa
    Ishak, Mohamad Ridzwan
    Imatomi, Junichiro
    5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 2016, 19 : 955 - 960
  • [10] Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach
    Mohapatra, Deepak K.
    Deo, Chitta R.
    Mishra, Punyapriya
    Ekka, Kiran K.
    Mishra, Chandrakanta
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023, 237 (06) : 2440 - 2448
12345