Thermal history analysis of friction stir processed and submerged friction stir processed aluminum

被引：45

作者：

Hofmann, Douglas C. ^{[1
]}

Vecchio, Kenneth S. ^{[1
]}

机构：

[1] Univ Calif San Diego, Dept Mech & Aerosp Engn, La Jolla, CA 92093 USA

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 465卷 / 1-2期

关键词：

friction stir processing; thermal history analysis; grain refinement; severe plastic deformation; nanocrystalline grain size;

D O I：

10.1016/j.msea.2007.02.056

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this research, equations are developed to model the rate of heat input from different geometries of friction stir processing (FSP) tools. The model is then compared with actual heat input obtained from embedded thermocouples within the stirred region. The cooling curves obtained from the thermocouple data are then applied to the Derby-Ashby model for high angle grain boundary migration to predict the final grain size of a bulk sample produced by the friction stirring method. Submerged friction stir processing (SFSP) is introduced as a way of increasing the cooling rate of the bulk samples in an attempt to decrease the grain size. Microstructures obtained from both FSP and SFSP are characterized using transmission electron microscopy. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：165 / 175

页数：11

共 50 条

[31] Microstructure and wear behavior of friction stir processed cast hypereutectic aluminum silicon
Ahmad, Rosli
Abdulmalik, Samir Sani
Usman, Ojonimi Yusuf
Danjuma, Sufyanu Bashir
8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2017 (ICME'17), 2017, 135
[32] Superplastic Forming of Multipass Friction Stir Processed Aluminum-Magnesium Alloy
S. Pradeep
Vivek Pancholi
Metallurgical and Materials Transactions A, 2014, 45 : 6207 - 6216
[33] Low temperature enhanced ductility of friction stir processed 5083 aluminum alloy
El-Danaf, Ehab A.
El-Rayes, Magdy M.
Soliman, Mahmoud S.
BULLETIN OF MATERIALS SCIENCE, 2011, 34 (07) : 1447 - 1453
[34] Fine-grain evolution in friction-stir processed 7050 aluminum
Rhodes, CG
Mahoney, MW
Bingel, WH
Calabrese, M
SCRIPTA MATERIALIA, 2003, 48 (10) : 1451 - 1455
[35] Prediction of bending limits in friction-stir-processed thick plate aluminum
M. P. Miles
M. W. Mahoney
C. B. Fuller
Metallurgical and Materials Transactions A, 2006, 37 : 399 - 404
[36] Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083
Lokesh Singh
Mazin Mahmood Yahya
Bharat Singh
Shankar Sehgal
Kuldeep K. Saxena
Kahtan A. Mohammed
Metal Science and Heat Treatment, 2023, 65 : 421 - 425
[37] Microstructure and Properties of Forced Cooling Friction Stir Processed 2024 Aluminum Alloy
Wang Kuaishe
Kong Liang
Wang Wen
Lin Zhaoxia
Wang Feng
RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (05) : 1053 - 1056
[38] Mechanical Properties of Friction Stir Processed, Friction Stir Welded, and Gas Metal Arc Welded AA5083 Aluminum Plate
Smith, C. B.
Mishra, R. S.
Argade, G. R.
Mahoney, M. W.
FRICTION STIR WELDING AND PROCESSING VI, 2011, : 267 - 280
[39] Creep Behavior of Friction Stir Processed Haynes 282
Komarasamy, Mageshwari
Smith, Christopher
Darsell, Jens
Grant, Glenn
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
[40] Abnormal grain growth in friction stir processed alloys
Charit, I.
Mishra, R. S.
SCRIPTA MATERIALIA, 2008, 58 (05) : 367 - 371

← 1 2 3 4 5 →