Thermal history analysis of friction stir processed and submerged friction stir processed aluminum

被引：45
|
作者：
Hofmann, Douglas C. [1 ]
Vecchio, Kenneth S. [1 ]
机构：
[1] Univ Calif San Diego, Dept Mech & Aerosp Engn, La Jolla, CA 92093 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 465卷 / 1-2期
关键词：
friction stir processing; thermal history analysis; grain refinement; severe plastic deformation; nanocrystalline grain size;
D O I：
10.1016/j.msea.2007.02.056
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this research, equations are developed to model the rate of heat input from different geometries of friction stir processing (FSP) tools. The model is then compared with actual heat input obtained from embedded thermocouples within the stirred region. The cooling curves obtained from the thermocouple data are then applied to the Derby-Ashby model for high angle grain boundary migration to predict the final grain size of a bulk sample produced by the friction stirring method. Submerged friction stir processing (SFSP) is introduced as a way of increasing the cooling rate of the bulk samples in an attempt to decrease the grain size. Microstructures obtained from both FSP and SFSP are characterized using transmission electron microscopy. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：165 / 175
页数：11
相关论文
共 50 条
  • [21] Modeling of thermal cycles and microstructural analysis of pipeline steels processed by friction stir processing
    J. A. Avila
    R. A. R. Giorjao
    J. Rodriguez
    E. B. Fonseca
    A. J. Ramirez
    The International Journal of Advanced Manufacturing Technology, 2018, 98 : 2611 - 2618
  • [22] Modeling of thermal cycles and microstructural analysis of pipeline steels processed by friction stir processing
    Avila, J. A.
    Giorjao, R. A. R.
    Rodriguez, J.
    Fonseca, E. B.
    Ramirez, A. J.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (9-12): : 2611 - 2618
  • [23] Evaluation of microstructure and wear behavior of friction stir processed cast aluminum alloy
    Alidokht, Sima Ahmad
    Abdollah-zadeh, Amir
    Soleymani, Soheil
    Saeid, Tohid
    Assadi, Hamid
    MATERIALS CHARACTERIZATION, 2012, 63 : 90 - 97
  • [24] Superplastic Forming of Multipass Friction Stir Processed Aluminum-Magnesium Alloy
    Pradeep, S.
    Pancholi, Vivek
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (13): : 6207 - 6216
  • [25] Superplasticity of a Friction Stir Processed 7075-T651 aluminum alloy
    Dieguez, T.
    Burgueno, A.
    Svoboda, H.
    11TH INTERNATIONAL CONGRESS ON METALLURGY & MATERIALS SAM/CONAMET 2011, 2012, 1 : 110 - 117
  • [26] The mechanical and thick section bending behavior of friction stir processed aluminum plate
    Hulbert, D.
    Fuller, C.
    Mahoney, M.
    London, B.
    SCRIPTA MATERIALIA, 2007, 57 (03) : 269 - 272
  • [27] Low temperature enhanced ductility of friction stir processed 5083 aluminum alloy
    Ehab A. El-Danaf
    Magdy M. El-Rayes
    Mahmoud S. Soliman
    Bulletin of Materials Science, 2011, 34 : 1447 - 1453
  • [28] Biaxial Stressing of Sheets of Friction Stir Processed Aluminum Alloy A319
    Karthikeyan, L.
    Senthilkumar, V. S.
    Padmanabhan, K. A.
    MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (11) : 1297 - 1303
  • [29] Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083
    Singh, Lokesh
    Yahya, Mazin Mahmood
    Singh, Bharat
    Sehgal, Shankar
    Saxena, Kuldeep K.
    Mohammed, Kahtan A.
    METAL SCIENCE AND HEAT TREATMENT, 2023, 65 (7-8) : 524 - 528
  • [30] Prediction of bending limits in friction-stir-processed thick plate aluminum
    Miles, MP
    Mahoney, MW
    Fuller, CB
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (02): : 399 - 404
12345