Thermal history analysis of friction stir processed and submerged friction stir processed aluminum

被引：45
|
作者：
Hofmann, Douglas C. [1 ]
Vecchio, Kenneth S. [1 ]
机构：
[1] Univ Calif San Diego, Dept Mech & Aerosp Engn, La Jolla, CA 92093 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 465卷 / 1-2期
关键词：
friction stir processing; thermal history analysis; grain refinement; severe plastic deformation; nanocrystalline grain size;
D O I：
10.1016/j.msea.2007.02.056
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this research, equations are developed to model the rate of heat input from different geometries of friction stir processing (FSP) tools. The model is then compared with actual heat input obtained from embedded thermocouples within the stirred region. The cooling curves obtained from the thermocouple data are then applied to the Derby-Ashby model for high angle grain boundary migration to predict the final grain size of a bulk sample produced by the friction stirring method. Submerged friction stir processing (SFSP) is introduced as a way of increasing the cooling rate of the bulk samples in an attempt to decrease the grain size. Microstructures obtained from both FSP and SFSP are characterized using transmission electron microscopy. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：165 / 175
页数：11
相关论文
共 50 条
  • [1] Microstructure characterization of the stir zone of submerged friction stir processed aluminum alloy 2219
    Feng, Xiuli
    Liu, Huijie
    Lippold, John C.
    MATERIALS CHARACTERIZATION, 2013, 82 : 97 - 102
  • [2] Comparative analysis between normal and submerged friction stir processed friction stir welded dissimilar aluminium alloy joints
    Mabuwa, Sipokazi
    Msomi, Velaphi
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (05): : 9632 - 9644
  • [3] The strength of friction stir welded and friction stir processed aluminium alloys
    Starink, M. J.
    Deschamps, A.
    Wang, S. C.
    SCRIPTA MATERIALIA, 2008, 58 (05) : 377 - 382
  • [4] Comparative study of microstructural evolution and mechanical properties in friction stir processed, reinforced friction stir processed, and heat-treated reinforced friction stir processed Al composites
    Banerjee, Anubhav
    Dhar, Arindam
    Mondal, Arpan K.
    Kumar, Ajay
    Verma, Rajesh K.
    Chatterjee, Suman
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2024,
  • [5] Bending Limits in Friction Stir Processed 5083 Aluminum Plate
    Miles, M. P.
    Smith, C.
    Opichka, J.
    Cerveny, L.
    Mahoney, M.
    Mohan, A.
    Mishra, R. S.
    FRICTION STIR WELDING AND PROCESSING V, 2009, : 135 - +
  • [6] Thick plate rending of friction stir processed aluminum alloys
    Mahoney, MW
    Fuller, CB
    Miles, MP
    Bingel, WH
    FRICTION STIR WELDING PROCESSING III, 2005, : 131 - 137
  • [7] Wear analysis of friction stir processed aluminum composite reinforced by boron carbide
    Sharma, Harsh
    Tiwari, Sunil Kumar
    Chauhan, Vijay Singh
    Kumar, Rajeev
    Gulati, Piyush
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 2141 - 2145
  • [8] Review on Friction Stir Processed TIG and Friction Stir Welded Dissimilar Alloy Joints
    Mabuwa, Sipokazi
    Msomi, Velaphi
    METALS, 2020, 10 (01)
  • [9] Cavitation erosion behavior of friction stir processed nickel aluminum bronze
    Li, Yang
    Lian, Ying
    Sun, Yanjun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 795 : 233 - 240
  • [10] ORIENTATION DISTRIBUTION IN FRICTION STIR PROCESSED A6061 ALUMINUM ALLOY
    Shibayanagi, Toshiya
    Matsumoto, Takamasa
    CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS II, 2007, 198 : 103 - +
12345