Numerical prediction of a single phase Pressurized Thermal Shock scenario for crack assessment in an Reactor Pressure Vessel wall

A pressurized thermal shock (PTS) in a reactor pressure vessel (RPV) wall of a Pressurized Water Reactor (PWR) could eventually lead to reduced integrity of the RPV. A PTS scenario may be initiated by a Loss-of-Coolant Accident (LOCA) in which the Emergency Core Cooling (ECC) injection causes a thermal shock in the vessel wall while the RPV is still partially pressurized. The traditional Thermal-Hydraulic system codes fail to reliably predict the complex three-dimensional thermal mixing phenomena in the down-comer occurring during the ECC injection. Therefore, a three-dimensional computational fluid dynamics (CFD) simulation of the transient is required to provide an accurate temperature distribution for reliable probabilistic analyses. The assessment of the failure probability due to a single phase PTS initiated by postulated defects in the vessel wall requires the computation of a long transient solution. Since the CFD calculation is computationally expensive, the symmetry of a four-leg PWR geometry is utilized to reduce the computational domain. In the present work, several Unsteady Reynolds Averaged Navier-Stokes (URANS) CFD simulations are performed to select an optimal computational domain that is representative for a typical PWR. The computed temperature distribution is provided as input for the structural analyses to calculate the Stress Intensity Factor (SIF) along several postulated defects. The SIF is then used to evaluate the potential of crack propagation initiation of the defects. (C) 2020 Elsevier Ltd. All rights reserved.