A blended wing body airplane with a close-coupled, tilting tail

被引:4
作者
Nasir, R. E. M. [1 ]
Mazlan, N. S. C. [1 ]
Ali, Z. M. [1 ]
Wisnoe, W. [1 ]
Kuntjoro, W. [1 ]
机构
[1] Univ Teknol Mara, Fac Mech Engr, FTTC, ATR Grp, Shah Alam, Selangor, Malaysia
来源
AEROTECH VI - INNOVATION IN AEROSPACE ENGINEERING AND TECHNOLOGY | 2016年 / 152卷
关键词
DESIGN;
D O I
10.1088/1757-899X/152/1/012021
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
This paper highlights a novel approach to stabilizing and controlling pitch and yaw motion via a set of horizontal tail that can act as elevator and rudder. The tail is incorporated into a new design of blended wing body (BWB) aircraft, known as Baseline-V, located just aft of the trailing edge of its inboard wing. The proposed close-coupled tail is equipped with elevators that deflect in unison, and can tilt - an unusual means of tilting where if starboard side is tilted downward at k degree, and then the portside must be tilted upward at k degree too. A wind tunnel experiment is conducted to investigate aerodynamics and static stability of Baseline-V BWB aircraft. The model is being tested at actual flight speed of 15 m/s (54 km/h) with varying angle of attack for five elevator angle cases at zero tilt angle and varying sideslip angle for four tilt angle cases at one fixed elevator angle. The result shows that the aircraft's highest lift-to-drag ratio is 32. It is also found that Baseline-V is statically stable in pitch and yaw but has no clear indication in terms of roll stability.
引用
收藏
页数:10
相关论文
共 9 条
[1]  
Bolsunovsky N, 2001, AIRCR DESIGN, V4, P193
[2]  
Cai C F, 2014, ADV MAT RES, V1016, P359
[3]   ITU Tailless UAV Design [J].
Karakas, Hakki ;
Koyuncu, Emre ;
Inalhan, Gokhan .
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, 2013, 69 (1-4) :131-146
[4]   Aerodynamic Design Methodology for Blended Wing Body Transport [J].
Li Peifeng ;
Zhang Binqian ;
Chen Yingchun ;
Yuan Changsheng ;
Lin Yu .
CHINESE JOURNAL OF AERONAUTICS, 2012, 25 (04) :508-516
[5]   Design of the blended wing body subsonic transport [J].
Liebeck, RH .
JOURNAL OF AIRCRAFT, 2004, 41 (01) :10-25
[6]   Manufacturing Process of Blended Delta-Shaped Wing Model [J].
Mat, S. ;
Ishak, I. S. ;
Zakaria, K. ;
Khan, Z. Ajis .
MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1, 2014, 845 :971-974
[7]   Aerodynamic, stability and flying quality evaluation on a small blended wing-body aircraft with canard foreplanes [J].
Nasir, Rizal E. M. ;
Kuntjoro, Wahyu ;
Wisnoe, Wirachman .
2ND INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING, 2014, 15 :783-791
[8]   Aerodynamic considerations of blended wing body aircraft [J].
Qin, N ;
Vavalle, A ;
Le Moigne, A ;
Laban, M ;
Hackett, K ;
Weinerfelt, P .
PROGRESS IN AEROSPACE SCIENCES, 2004, 40 (06) :321-343
[9]   Aerodynamic yawing moment characteristics of bird wings [J].
Sachs, G .
JOURNAL OF THEORETICAL BIOLOGY, 2005, 234 (04) :471-478