An introduction to the vibration analysis for the precision honing of bores

被引：5

作者：

Schmitt, Christina ^{[1
]}

Kleinand, Sven ^{[1
]}

Baehre, Dirk ^{[1
]}

机构：

[1] Univ Saarland, Inst Mfg Technol, Saarbrucken, Germany

来源：

43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 | 2015年 / 1卷

关键词：

Precision machining; Honing; Vibration analysis; Process monitoring; ACOUSTIC-EMISSION;

D O I：

10.1016/j.promfg.2015.09.056

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Honing is mostly the last step in the production process for precise elements and thus has to comply with high standards for the resulting quality regarding form, measurement and surface quality. Tolerances are currently even further reduced. Crucial for the ability of the honing process to reach the high quality is the process control. A new approach to a further improvement of the honing process could be the use of vibration analysis during the machining process. Vibration analysis for process control is already successfully used, e.g. for grinding. The paper presents an experimental setup for the measurement of vibrations during the honing process and shows first results of conducted experiments.

引用

页码：637 / 643

页数：7

共 50 条

[41] Vibration-assisted precision machining of steel with PCD tools [J].

Zhou, M ;

Eow, YT ;

Ngoi, BKA ;

Lim, EN .

MATERIALS AND MANUFACTURING PROCESSES, 2003, 18 (05) :825-834

[42] Precision turning with instrumented vibration-damped boring bars [J].

Sorby, Knut ;

Ostling, Dan .

8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 :666-669

[43] Study on the mechanism of burr formation in ultrasonic vibration-assisted honing 9Cr18MoV valve sleeve [J].

Wang, Peng ;

Yang, Chang-Yong ;

Yuan, Ying-Ying ;

Fu, Yu-Can ;

Ding, Wen-Feng ;

Xu, Jiu-Hua ;

Chen, Yong .

ADVANCES IN MANUFACTURING, 2025, 13 (03) :606-619

[44] Optimization and Sensitivity Analysis of the Cutting Conditions in Rough, Semi-Finish and Finish Honing [J].

Buj-Corral, Irene ;

Rodero-de-Lamo, Lourdes ;

Marco-Almagro, Lluis .

MATERIALS, 2022, 15 (01)

[45] Study on the effect of tool rake angle on cutting vibration in precision machining [J].

Wang, GC ;

Ma, LJ ;

Pei, HJ .

ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 :127-131

[46] Tricopter vibration analysis [J].

Popardovský V. ;

Ferenčák M. ;

Kriš T. ;

Tomaštík M. ;

Novotný L. .

Diagnostyka, 2021, 22 (03) :67-72

[47] Finishing process analysis between honing and hard hobbing in pinion gears applied to a steering system [J].

dos Santos, Sandro Pereira ;

Brandao, Lincoln Cardoso ;

Gallicchio, Luis Henrique ;

Silveira, Zilda de Castro .

2011 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY ENGINEERING (ICAEE), 2012, 14 :2-8

[48] Diagnostics of reciprocating machines using vibration analysis and ultrasound techniques [J].

Kamran, M. S. ;

Rehman, A. Ur ;

Adnan, M. ;

Ali, H. ;

Noor, F. .

INSIGHT, 2019, 61 (11) :676-682

[49] ANALYSIS OF DIMENSIONAL ERROR AND IMPROVEMENT OF HONING ACCURACY BY IN-PROCESS COMPENSATION OF THERMAL AND ELASTIC DEFORMATIONS [J].

YOKOYAMA, K ;

ICHIMIYA, R ;

IWATA, K ;

MORIWAKI, T .

INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1992, 26 (03) :251-256

[50] Weld quality characterization by vibration analysis for ultrasonic metal welding processes [J].

Mueller, Florian W. ;

Mirz, Christian ;

Weil, Sascha ;

Schiebahn, Alexander ;

Corves, Burkhard ;

Reisgen, Uwe .

JOURNAL OF ADVANCED JOINING PROCESSES, 2023, 8

← 1 2 3 4 5 →