Minimum Quantity Lubrication: Influence of the oil nature on surface integrity

被引：17
|
作者：
Werda, Sana [1 ,2 ]
Duchosal, Arnaud [1 ]
Le Quilliec, Guenhael [1 ]
Morandeau, Antoine [2 ]
Leroy, Rene [1 ]
机构：
[1] Univ Tours, 7 Ave Marcel Dassault, F-37200 Tours, France
[2] Sandvik Coromant, Rue Henri Garih, F-37230 Fondettes, France
来源：
3RD CIRP CONFERENCE ON SURFACE INTEGRITY | 2016年 / 45卷
关键词：
MQL; Milling tool; Synthetic ester; Fatty alcohol; Surface roughness; Tool life; CUTTING FLUID; STEEL;
D O I：
10.1016/j.procir.2016.02.330
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Minimum Quantity Lubrication (MQL) is a lubrication method in machining field. It consists in spraying very small amount of oil to the cutting edge with compressed air. This technique decreases friction between chip and the cutting face of the tool which leads to better surface finish and tool life. Well-chosen oil will give best results on surface integrity. Regarding the choice of oil, this paper aims to identify the evolution of tool temperature, tool wear, surface roughness and cutting forces in milling process. The influence of two oils (synthetic ester and fatty alcohol) is investigated and compared with dry machining. (C) 2016 The Authors. Published by Elsevier B.V.
引用
收藏
页码：287 / 290
页数：4
相关论文
共 50 条
  • [1] Influence of minimum quantity lubrication on surface integrity of ground hardened H13 hot die steel
    A. S. Awale
    A. Srivastava
    M. Vashista
    M. Z. Khan Yusufzai
    The International Journal of Advanced Manufacturing Technology, 2019, 100 : 983 - 997
  • [2] Influence of minimum quantity lubrication on surface integrity of ground hardened H13 hot die steel
    Awale, A. S.
    Srivastava, A.
    Vashista, M.
    Yusufzai, M. Z. Khan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (1-4): : 983 - 997
  • [3] Influence of minimum quantity lubrication in the surface quality of milled maraging steel
    Tomaz, Italo V.
    Pardal, Juan Manuel
    Fonseca, Maria Cindra
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (9-12): : 4301 - 4311
  • [4] Influence of minimum quantity lubrication in the surface quality of milled maraging steel
    Ítalo V. Tomaz
    Juan Manuel Pardal
    Maria Cindra Fonseca
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 4301 - 4311
  • [5] The Influence of Spray Characteristics on Surface Roughness in Minimum Quantity Lubrication Turning
    Zhang, Chunyan
    Wang, Guicheng
    Pei, Hongjie
    Shen, Chungen
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1906 - 1909
  • [6] Experimental investigation of surface quality for minimum quantity oil–water lubrication grinding
    Cong Mao
    Xiaojun Tang
    Hongfu Zou
    ZhiXiong Zhou
    Wangwu Yin
    The International Journal of Advanced Manufacturing Technology, 2012, 59 : 93 - 100
  • [7] Influence of oil mist parameters on minimum quantity lubrication - MQL grinding process
    Tawakoli, T.
    Hadad, M. J.
    Sadeghi, M. H.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (06): : 521 - 531
  • [8] Minimum Quantity Oil Lubrication of Roller Bearings.
    Schemmel, Hans
    Schmiertechnik + Tribologie, 1980, 27 (06): : 193 - 196
  • [9] Influence of minimum quantity lubrication on surface quality during circular sawing of wood
    Güzel K.
    Jaquemod A.
    Stehle T.
    Möhring H.C.
    WT Werkstattstechnik, 2022, 112 (1-2): : 67 - 72
  • [10] Experimental investigation of surface quality for minimum quantity oil-water lubrication grinding
    Mao, Cong
    Tang, Xiaojun
    Zou, Hongfu
    Zhou, ZhiXiong
    Yin, Wangwu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 59 (1-4): : 93 - 100
12345