Removal of organic micropollutants from biologically treated greywater using continuous-flow vacuum-UV/UVC photo-reactor

Despite growing apprehension regarding the fate of organic micropollutants (MPs) of emerging concern, little attention has been paid to their presence in domestic greywater, where they mainly originate from personal care products. Many MPs are not fully removed in conventional greywater treatments and require additional treatment. Vacuum-UV radiation (VUV) can generate center dot OH in situ, via water photolysis, initiating advanced oxidation process (AOP) without any chemical addition. Despite growing interest in VUV-based AOP, its performance in real-life grey- or wastewater matrices has hardly been investigated. The present study investigates the removal of triclosan (TCS) and oxybenzone (BP3), common antibacterial and UV-filter MPs, in deionized water (DIW) and in treated greywater (TGW) using combined UVC/VUV or UVC only radiation in a continuous-flow reactor. Degradation kinetics of these MPs and their transformation products (TPs) were addressed, as well as bacterial growth inhibition of the resulting reactor's effluent. In DIW, MP degradation was much faster under the combined UVC/VUV irradiation. In TGW, the combined radiation successfully removed both MPs but at lower efficiency than in DIW, as particles and dissolved organic matter (DOM) acted as radical scavengers. Filtration and partial DOM removal prior to irradiation improved the process efficiency and reduced energy requirements under the combined radiation (from 1.6 and 167 to 1.1 and 6.0 kWh m(-3)center dot(& x5bc;)order(-1) for TCS and BP3, respectively). VUV radiation also reduced TP concentrations in the effluent. As a result, bacterial growth inhibition of triclosan solution irradiated by VUC/VUV was lower than that irradiated by UVC light alone, for UV dose > 120 mJ cm(-2).