STRUCTURAL, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF SPARK PLASMA SINTERED TI6AL4V ALLOY

被引：0
|
作者：
Mroz, A. [1 ]
Garbiec, D. [1 ]
Wielowiejska-Giertuga, A. [1 ]
Wisniewski, T. [1 ]
Gierzynska-Dolna, M. [1 ]
Martyla, A. [2 ]
机构：
[1] Met Forming Inst, Poznan, Poland
[2] Cent Lab Batteries & Cells, Poznan, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2016年 / 61卷 / 02期
关键词：
Ti6Al4V alloy; spark plasma sintering; mechanical properties; friction and wear properties; HEAT-TREATMENT; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1515/amm-2016-0113
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of spark plasma sintering parameters on the structural, mechanical and tribological characteristics of the Ti6Al4V alloy, which is used as implant material in biomedical engineering, was investigated. The experimental data confirm that full density and attractive mechanical properties can be obtained using the spark plasma sintering method. Tribological tests, performed in dry conditions, allowed the authors to indicate the most suitable sintering parameters. The material characterized by the highest wear resistance was selected for further tribological testing in articulation with UHMWPE in simulated body fluids. Although the weight of the polymeric material articulating against the sintered Ti6Al4V was slightly higher compared to the UHMWPE articulating against the reference material (Ti6Al4V rod), the friction coefficient was lower.
引用
收藏
页码：665 / 670
页数：6
相关论文
共 50 条
  • [1] Effect of compaction pressure and heating rate on microstructure and mechanical properties of spark plasma sintered Ti6Al4V alloy
    Garbiec, Dariusz
    Siwak, Piotr
    Mroz, Adrian
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2016, 16 (04) : 702 - 707
  • [2] Effect of Nickel Addition on Microstructure and Mechanical Properties of the Spark Plasma Sintered Ti-6Al-4V Alloy
    Muthuchamy, A.
    Rajadurai, M.
    Annamalai, A. Raja
    Agrawal, Dinesh K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (08) : 2127 - 2134
  • [3] Compositions and tribological properties of PEO coatings on Ti6Al4V alloy
    Qin, Y. K.
    Xiong, D. S.
    Li, J. L.
    Tyagi, R.
    SURFACE ENGINEERING, 2017, 33 (12) : 895 - 902
  • [4] Effect of Nickel Addition on Microstructure and Mechanical Properties of the Spark Plasma Sintered Ti–6Al–4V Alloy
    A. Muthuchamy
    M. Rajadurai
    A. Raja Annamalai
    Dinesh K. Agrawal
    Transactions of the Indian Institute of Metals, 2019, 72 : 2127 - 2134
  • [5] Fabrication And Effect Of Milling Time On Spark Plasma Sintered Ti6Al4V/Gr Composite
    Ayodele, O. O.
    Komape, T. J.
    Awotunde, M. A.
    Shongwe, M. B.
    Obadele, B. A.
    Babalola, B. J.
    Olubambi, P. A.
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3693 - 3701
  • [6] Mechanical and tribological properties of Ti6Al4V alloy reinforced with Cu-coated multilayer graphene
    Zhou, Hongyan
    Xie, Fang
    Liu, Yuan
    Li, Ben
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [7] Interface Analysis of Spark Plasma Sintered Carbon Nanotube Reinforced Ti6Al4V
    Adegbenjo, A. O.
    Olubambi, P. A.
    Westraadt, J. E.
    Lesufi, M.
    Mphahlele, M. R.
    JOM, 2019, 71 (07) : 2262 - 2271
  • [8] Wear studies of spark plasma sintered ZrO2 reinforced Ti-6Al-4V alloy
    Semetse, Lerato
    Obadele, Babatunde Abiodun
    Raganya, Lerato
    Olubambi, Peter Apata
    MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 468 - 474
  • [9] Microstructure and mechanical properties of selective laser melted Ti6Al4V alloy
    Losertova, M.
    Kubes, V.
    27TH JOINT SEMINAR DEVELOPMENT OF MATERIALS SCIENCE IN RESEARCH AND EDUCATION, 2017, 266
  • [10] Influence of TiCp ceramic reinforcement on Ti6Al4V alloy matrix via spark plasma sintering technique
    Lal, Basant
    Dey, Abhijit
    Wani, M. F.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2025, 11 (01) : 589 - 607
12345