Influence of Manufacturing Tolerances on Cogging Torque in Interior Permanent Magnet Machines with Eccentric and Sinusoidal Rotor Contours

被引:38
作者
Ge, Xiao [1 ]
Zhu, Z. Q. [1 ]
机构
[1] Univ Sheffield, Elect Machines & Drives Grp, Sheffield S1 3JD, S Yorkshire, England
关键词
Cogging torque; interior permanent magnet (IPM) machines; manufacturing tolerances; rotor contour; DESIGN; MOTORS;
D O I
10.1109/TIA.2017.2693264
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Rotor shaping methods are frequently used to reduce the cogging torque in interior permanent magnet (IPM) machines. This paper investigates the influence of manufacturing tolerances on cogging torque in IPM machines with eccentric and sinusoidal rotor contours. First, two 12-slot/8-pole IPM machine models are established and the fundamental performance under ideal conditions is presented. Then, based on the most sensitive distributions of nonideal PMs and assembly tooth-bulges, additional cogging torque components are calculated, respectively, together with a comparative study to identify the different sensitivities between the two rotor contour designs. For verification, the field spatial harmonics with and without considering the tolerances are further analyzed, followed by tests on the prototypes with and without amplified tolerances.
引用
收藏
页码:3568 / 3578
页数:11
相关论文
共 27 条
[21]   Torque Estimation in High-Efficency IPM Synchronous Motor Drives [J].
Tinazzi, Fabio ;
Zigliotto, Mauro .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2015, 30 (03) :983-990
[22]  
Tsuruta T., 2006, U.S. Patent, Patent No. [7 042 127 B2, 7042127]
[23]   Comparison of Five Topologies for an Interior Permanent-Magnet Machine for a Hybrid Electric Vehicle [J].
Wang, Aimeng ;
Jia, Yihua ;
Soong, W. L. .
IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (10) :3606-3609
[24]   Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines With Static and Rotating Eccentricities [J].
Zhu, Z. Q. ;
Wu, L. J. ;
Jamil, M. L. Mohd .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2014, 50 (05) :3265-3277
[25]   Influence of Additional Air Gaps Between Stator Segments on Cogging Torque of Permanent-Magnet Machines Having Modular Stators [J].
Zhu, Z. Q. ;
Azar, Z. ;
Ombach, G. .
IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (06) :2049-2055
[26]  
Zhu ZQ, 2009, IEEE POW ENER SOC GE, P3424
[27]   Influence of design parameters on cogging torque in permanent magnet machines [J].
Zhu, ZQ ;
Howe, D .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2000, 15 (04) :407-412