Thermal expansion and residual stress behaviour of electron beam evaporated yttria stabilized zirconia films on Inconel-690 substrates

Nuclear vitrification components used in melter pot made of Ni-base superalloys degrade prematurely due to alloy-waste glass interaction and the formation of secondary precipitates. Deposition of cubic yttria stabilized zirconia (c-YSZ) coating has been recommended as a diffusion barrier material to delay or reduce the failure of the alloy and to enable an extended life. In the present work, c-YSZ films have been deposited on Inconel-690 substrate by electron beam evaporation technique at various substrate temperatures from 673 K to 973 K. The residual stress in the film surface and at the film/substrate interface was measured using grazing incidence x-ray diffraction (GIXRD) with various incidence angles. It was observed that the residual stress at the film/substrate interface region changes from tensile to compressive when the substrate temperature was increased from 673 K to 973 K during deposition. Furthermore, the thermal expansion coefficient (TEC) of Inconel-690 substrate and YSZ film coated Inconel-690 substrate were determined by high temperature (HTXRD) measurement in the temperature range of 298-1273 K with 100 K interval. The linear TECs of Inconel-690 and YSZ coated Inconel-690 at 1273 K were found to be 1.53 x 10(-5) K-1 and 6.04 x 10(-6) K-1, respectively. (C) 2017 Elsevier B.V. All rights reserved.