The joint properties of copper by friction stir welding

被引：220

作者：

Lee, WB ^{[1
]}

Jung, SB ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Dept Adv Mat Engn, Suwon 440746, Kyounggi Do, South Korea

来源：

MATERIALS LETTERS | 2004年 / 58卷 / 06期

关键词：

friction stir welding; copper; microstructure; mechanical properties;

D O I：

10.1016/j.matlet.2003.08.014

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The objective of this work was to demonstrate the feasibility of triction stir welding (FSW) for joining of copper. Defect free weld were produced on 4 turn thick copper plate at travel speed of 61 mm/min and tool rotation speed of 1250 rpm using a general tool steel as the welding tool. The stir zone showed the very fine and equaxied grain structure compared to the base metal which had a elongated grain and its size is approximately 100 mum. The heat-affected zone (HAZ) which lies beside the stir zone had a near-equaxied and larger grain structure than that of the base metal due to annealing effect. Slight softening region was formed in the weld zone due to lower density of dislocation relative to the base metal. Transverse tensile strength of FSW copper joint reached about 87% of that of the base metal and showed slight higher value than that of the EBW copper joint. (C) 2003 Elsevier B.V. All rights reserved.

引用

页码：1041 / 1046

页数：6

共 14 条

[1]

[Anonymous], P 2 INT S FRICT STIR

[2]

[Anonymous], 2001, P 3 INT S FRICT STIR

[3]

[Anonymous], 1999, P 1 INT S FRICT STIR

[4] Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys [J].

Jata, KV ;

Semiatin, SL .

SCRIPTA MATERIALIA, 2000, 43 (08) :743-749

[5]

JUHAS M, 2001, P 3 INT S FRICT STIR

[6]

KALLEE S, 1997, SCHWEISSEN SCHNEIDEN, V36, P69

[7] The joint characteristics of friction stir welded AZ91D magnesium alloy [J].

Lee, WB ;

Kim, JW ;

Yeon, YM ;

Jung, SB .

MATERIALS TRANSACTIONS, 2003, 44 (05) :917-923

[8]

Lienert TJ, 2003, WELD J, V82, p1S

[9] Properties of friction-stir-welded 7075 T651 aluminum [J].

Mahoney, MW ;

Rhodes, CG ;

Flintoff, JG ;

Spurling, RA ;

Bingel, WH .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (07) :1955-1964

[10] Dynamic recrystallization in friction-stir welding of aluminium alloy 1100 [J].

Murr, LE ;

Liu, G ;

McClure, JC .

JOURNAL OF MATERIALS SCIENCE LETTERS, 1997, 16 (22) :1801-1803

← 1 2 →