Fatigue properties of combined friction stir and adhesively bonded AA6082-T6 overlap joints

被引：11
作者：
Maciel, Ricardo [1 ]
Bento, Tiago [1 ]
Braga, Daniel F. O. [1 ]
da Silva, Lucas F. M. [2 ]
Moreira, Pedro M. G. P. [3 ]
Infante, Virginia [1 ]
机构：
[1] Univ Lisbon, LAETA, IDMEC, Inst Super Tecnico, Ave Rovisco Pais 1, P-1049001 Lisbon, Portugal
[2] Univ Porto, FEUP, Rua Dr Roberto Frias S-N, P-4200465 Porto, Portugal
[3] Univ Porto, INEGI, Rua Dr Roberto Frias 400, P-4200465 Porto, Portugal
来源：
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2020年 / 43卷 / 09期
关键词：
adhesive joints; fatigue; friction stir welding; welding; II FRACTURE CHARACTERIZATION; ALUMINUM JOINTS; BEHAVIOR; TOUGHNESS;
D O I：
10.1111/ffe.13287
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Even though friction stir welding (FSW) has been shown to produce high performing butt joints, stress concentration at the weld edges in overlap FSW significantly reduces the performance of these joints. By combining FSW and adhesive bonding into a friction stir (FS) weld bonding, joint mechanical performance is greatly improved. Quasistatic and fatigue strength of the proposed FS weld-bonding joints was assessed and benchmarked against overlap FSW and adhesive bonding. The characterization of the structural adhesive is also presented, including differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), as well as mechanical characterization with curing temperature. A small process parameter study was made to select proper FSW parameters for AA6082-T6 overlap FSW and FS weld-bonded joints. FS weld bonding achieved a significant increase in quasistatic and fatigue strength when compared with overlap FSW, with 79.9% of the fatigue strength of adhesive-bonded joints at 10(6)cycles, whereas FSW had 41.6%.
引用
收藏
页码：2169 / 2180
页数：12
相关论文
共 25 条
[11]   Equivalent crack based mode II fracture characterization of wood [J].
de Moura, MFSF ;
Silva, MAL ;
de Morais, AB ;
Morais, JJL .
ENGINEERING FRACTURE MECHANICS, 2006, 73 (08) :978-993
[12]   Fatigue properties of friction stir overlap welds [J].
Ericsson, Mats ;
Jin, Lai-Zhe ;
Sandstrom, Rolf .
INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (01) :57-68
[13]   ProFatigue: A software program for probabilistic assessment of experimental fatigue data sets [J].
Fernandez-Canteli, A. ;
Przybilla, C. ;
Nogal, M. ;
Lopez Aenlle, M. ;
Castillo, E. .
XVII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM17), 2014, 74 :236-241
[14]   Fatigue behaviour of Al2024-T3 friction stir welded lap joints [J].
Fersini, D. ;
Pirondi, A. .
ENGINEERING FRACTURE MECHANICS, 2007, 74 (04) :468-480
[15]   Curing rate effects on the toughness of epoxy polymers [J].
Incerti, D. ;
Wang, T. ;
Carolan, D. ;
Fergusson, A. .
POLYMER, 2018, 159 :116-123
[16]   Study of the fatigue behaviour of dissimilar aluminium joints produced by friction stir welding [J].
Infante, V. ;
Braga, D. F. O. ;
Duarte, F. ;
Moreira, P. M. G. ;
de Freitas, M. ;
de Castro, P. M. S. T. .
INTERNATIONAL JOURNAL OF FATIGUE, 2016, 82 :310-316
[17]   Influence of Adhesive in FSW: Investigation on Fatigue Behavior of Welded, Weld-Bonded, and Adhesive-Bonded Joints in Aluminum AA 6082 T6 [J].
Lertora, Enrico ;
Mandolfino, Chiara ;
Pizzorni, Marco ;
Gambaro, Carla .
MATERIALS, 2019, 12 (08)
[18]   Mode I fracture toughness of CFRP as a function of temperature and strain rate [J].
Machado, J. J. M. ;
Marques, E. A. S. ;
Campilho, R. D. S. G. ;
da Silva, Lucas F. M. .
JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (23) :3315-3326
[19]   Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys [J].
Maciel, Ricardo ;
Infante, Virginia ;
Braga, Daniel ;
Moreira, P. M. G. P. ;
da Silva, Lucas ;
Bento, Tiago .
FRATTURA ED INTEGRITA STRUTTURALE, 2019, 13 (48) :269-285
[20]  
McCray D, 2011, EVALUATION ADHESIVE
123