Novel recycled polyethylene/ground tire rubber/bitumen blends for use in roofing applications: Thermo-mechanical properties

被引:87
作者
Javier Navarro, Francisco [1 ]
Partal, Pedro [1 ]
Martinez-Boza, Francisco J. [1 ]
Gallegos, Crispulo [1 ]
机构
[1] Univ Huelva, Fac Ciencias Expt, Dept Ingn Quim, Huelva 21071, Spain
关键词
Recycled PE; Crumb tire rubber; Modified bitumen; MODIFIED BITUMEN; MECHANICAL-PROPERTIES; POLYMERS; BEHAVIOR;
D O I
10.1016/j.polymertesting.2010.03.010
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This paper summarises the effect of recycled polymers, such as ground tire rubber (GTR) and recycled polyethylene (RPE), on the thermal and rheological properties of modified bitumen blends. From the experimental results obtained, it can be deduced that GTR or RPE may enhance bitumen thermo-rheological behaviour. However, much more enhanced mechanical properties can be obtained using a combination of both recycled polymers. In that sense, GTR would mainly improve material behaviour at low in-service temperatures, since the glassy region is significantly shifted to much lower temperatures. Complementarily, RPE would mainly improve the high in-service temperature properties by largely increasing material elastic and viscous properties in this temperature region. As a result, and from an environmental point of view, the use of both GTR and RPE may contribute to solve a waste disposal problem, and to improve the quality of the resulting blends for roofing and waterproofing applications. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:588 / 595
页数:8
相关论文
共 25 条
[1]  
[Anonymous], TRANSPORTATION RES R
[2]  
*APME, 2007, COMP FACTS PLAST
[3]  
Bikiaris D, 1999, J APPL POLYM SCI, V71, P1089, DOI 10.1002/(SICI)1097-4628(19990214)71:7<1089::AID-APP7>3.3.CO
[4]  
2-9
[5]   Use of softwood bark charcoal as a modifier for road bitumen [J].
Chebil, S ;
Chaala, A ;
Roy, C .
FUEL, 2000, 79 (06) :671-683
[6]   Composites reinforced with reused tyres:: Surface oxidant treatment to improve the interfacial compatibility [J].
Colom, X. ;
Carrillo, F. ;
Canavate, J. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (01) :44-50
[7]   Blends of bitumen with polyethylenes [J].
Fawcett, AH ;
McNally, T ;
McNally, GM ;
Andrews, F ;
Clarke, J .
POLYMER, 1999, 40 (23) :6337-6349
[8]   An attempt at engineering the bulk properties of blends of a bitumen with polymers [J].
Fawcett, AH ;
McNally, T ;
McNally, G .
ADVANCES IN POLYMER TECHNOLOGY, 2002, 21 (04) :275-286
[9]   Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen [J].
Fuentes-Auden, Cristina ;
Andres Sandoval, Juan ;
Jerez, Abel ;
Navarro, Francisco J. ;
Martinez-Boza, Francisco J. ;
Partal, Pedro ;
Gallegos, Crispulo .
POLYMER TESTING, 2008, 27 (08) :1005-1012
[10]   Effect of waste polymer addition on the rheology of modified bitumen [J].
García-Morales, M ;
Partal, P ;
Navarro, FJ ;
Gallegos, C .
FUEL, 2006, 85 (7-8) :936-943