Effect of Nb and Ti Addition on Microstructure and Hardness of Dual Two-Phase Intermetallic Alloys Based on Ni3Al-Ni3V Pseudo-Binary Alloy System

被引：21

作者：

Kawahara, K. ^{[1
]}

Moronaga, T. ^{[1
]}

Kaneno, Y. ^{[1
]}

Kakitsuji, A. ^{[2
]}

Takasugi, T. ^{[1
]}

机构：

[1] Osaka Prefecture Univ, Dept Mat Sci, Sakai, Osaka 5998531, Japan

[2] Technol Res Inst Osaka Prefecture, Izumi 5941157, Japan

来源：

MATERIALS TRANSACTIONS | 2010年 / 51卷 / 08期

关键词：

intermetallics; microstructure; hardness test; scanning electron microscopy; intetfaces; PACKED NI3X X; INTERFACIAL DISLOCATION NETWORKS; HIGH-TEMPERATURE CREEP; V TYPE STRUCTURES; MECHANICAL PROPERTY; SINGLE-CRYSTALS; AL; DEFORMATION; EVOLUTION; COMPOUND;

D O I：

10.2320/matertrans.M2010097

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructures and hardness property of dual two-phase intermetallic alloys that are composed of various kind of volume fractions of geometrically closed packed (GCP) Ni3Al(Ll(2)) and Ni3V(D0(22)) phases was studied. Higher volume fraction of primary Ni3Al precipitates was observed in the Ti and Nb added alloys when keeping Al content the same. Also, the microstructures in the eutectoid (channel) region consisting of Ni3Al+Ni3V were sensitive to alloying addition. The hardness of dual two-phase intermetallic alloys was basically explained by mixture rule in hardness between primary Ni3Al precipitates and eutectoid region. Nb and Ti addition raised hardness of dual two-phase intermetallic alloys by solid solution hardening in the constituent phases. This hardening was more significant in Nb addition than in Ti addition. In addition to hardness owing to the mixture nile, additional hardening arising from interfacial area between primary Ni3Al precipitates and eutectoid region was found. With increasing Ni3Al/channel (eutectoid) interfacial area, the additional hardening increased. As temperature increases, the additional hardening monotonously decreased for the base and Nb added alloys but little decreased for the Ti added alloys. [doi:10.2320/matertrans.M2010097]

引用

页码：1395 / 1403

页数：9

共 37 条

[1] IMPROVEMENT IN ROOM-TEMPERATURE DUCTILITY OF THE L12 TYPE INTERMETALLIC COMPOUND NI3A1 BY BORON ADDITION [J].

AOKI, K ;

IZUMI, O .

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1979, 43 (12) :1190-1196

[2] Solute diffusion of Al-substituting elements in Ni3Al and the diffusion mechanism of the minority component [J].

Divinski, SV ;

Frank, S ;

Sodervall, U ;

Herzig, C .

ACTA MATERIALIA, 1998, 46 (12) :4369-4380

[3] The effect of second-phase dispersions on mechanical property of Ni3Si based multi-phase intermetallic alloys [J].

Fujita, A. ;

Kaneno, Y. ;

Takasugi, T. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 476 (1-2) :112-119

[4] THE ROLE OF INTERFACIAL DISLOCATION NETWORKS IN HIGH-TEMPERATURE CREEP OF SUPERALLOYS [J].

GABB, TP ;

DRAPER, SL ;

HULL, DR ;

MACKAY, RA ;

NATHAL, MV .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 118 :59-69

[5] THE INFLUENCE OF COHERENCY STRAIN ON THE ELEVATED-TEMPERATURE TENSILE BEHAVIOR OF NI-15CR-AL-TI-MO ALLOYS [J].

GROSE, DA ;

ANSELL, GS .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (09) :1631-1645

[6] Plastic deformation behavior of Ni3(Ti0.90Nb0.10) single crystals with the nine-layered ordered rhombohedral structure [J].

Hagihara, K ;

Tanaka, T ;

Nakano, T ;

Umakoshi, Y .

ACTA MATERIALIA, 2005, 53 (19) :5051-5059

[7]

HAYASHI E, MAT SCI ENG A UNPUB

[8]

Hayashi E, 2010, TETSU TO HAGANE, V96, pA386

[9]

HONG TM, 1988, MATER RES SOC S P, V133, P429, DOI DOI 10.1557/PROC-133-429

[10] Microstructural evolution and mechanical property in dual two-phase intermetallic alloys composed of geometrically close-packed Ni3X (X: Al and V) containing Nb [J].

Kaneno, Yasuyuki ;

Soga, Wataru ;

Tsuda, Hiroshi ;

Takasugi, Takayuki .

JOURNAL OF MATERIALS SCIENCE, 2008, 43 (02) :748-758

← 1 2 3 4 →