Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

被引：21
作者：
Stalin, B. [1 ]
Ravichandran, M. [2 ]
Vadivel, K. [1 ]
Vairamuthu, J. [3 ]
机构：
[1] Anna Univ, Dept Mech Engn, Reg Campus Madurai, Madurai 625019, Tamil Nadu, India
[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India
[3] Sethu Inst Technol, Dept Mech Engn, Pulloor 626115, Kariapatti, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Brazing; Brass; 319; L9 orthogonal array; Taguchi method; S/N ratio; ANOVA; WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; STRENGTH; MICROSTRUCTURE; STEEL; BEAM;
D O I：
10.1016/j.matpr.2019.04.226
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Brazing is the metal joining processes of melting a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. The oxyacetylene brazing processes are executed with 18 brass plates, where each pair of same plates is joined together as butt joint. The copper flux powder is used, in order to control the oxidation during brazing processes. Brazed brass 319 joints are tested for the tensile and impact strength observation. The objective of this work is to optimize the process parameters involved in brazing processes using Taguchi optimization with L9 orthogonal array, signal to noise ratio and analysis of variance. The optimization processes are executed using MATLAB software. The obtained results will be helpful to the brazing industries to join the brass plates. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：237 / 243
页数：7
相关论文
共 50 条
[41]   Optimization of molding process parameters for CF/PEEK composites based on Taguchi method [J].
Dai, Guangming ;
Zhan, Lihua ;
Guan, Chenglong ;
Huang, Minghui .
COMPOSITES AND ADVANCED MATERIALS, 2021, 30
[42]   Optimization Of Welding Process Parameters By Taguchi Method (Experimentation and Application) [J].
Ramreddy, B. ;
Choudhary, D. ;
Kumar, Sujeet .
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 :663-667
[43]   Statistical Modelling and Optimization of TIG Welding Process Parameters Using Taguchi's Method [J].
Omprakasam, S. ;
Marimuthu, K. ;
Raghu, R. ;
Velmurugan, T. .
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2022, 68 (03) :200-209
[44]   Optimization of process parameters by Taguchi method in the recovery of lactose from whey using sonocrystallization [J].
Patel, S. R. ;
Murthy, Z. V. P. .
CRYSTAL RESEARCH AND TECHNOLOGY, 2010, 45 (07) :747-752
[45]   Optimization of green sand casting process parameters of a foundry by using Taguchi's method [J].
Kumar, Sushil ;
Satsangi, P. S. ;
Prajapati, D. R. .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 55 (1-4) :23-34
[46]   Optimization of green sand casting process parameters of a foundry by using Taguchi’s method [J].
Sushil Kumar ;
P. S. Satsangi ;
D. R. Prajapati .
The International Journal of Advanced Manufacturing Technology, 2011, 55 :23-34
[47]   Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method [J].
Mahapatra, S. S. ;
Patnaik, Amar .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 34 (9-10) :911-925
[48]   Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method [J].
S. S. Mahapatra ;
Amar Patnaik .
The International Journal of Advanced Manufacturing Technology, 2007, 34 :911-925
[49]   Optimization of tribological parameters for a brake pad using Taguchi design method [J].
Ferit Ficici ;
Mesut Durat ;
Murat Kapsiz .
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, 36 :653-659
[50]   Process Parameters Optimization for Friction Stir Welding of Pure Aluminium to Brass (CuZn30) using Taguchi Technique [J].
Elfar, O. M. R. ;
Rashad, R. M. ;
Megahed, H. .
2016 4TH INTERNATIONAL CONFERENCE ON NANO AND MATERIALS SCIENCE (ICNMS 2016), 2016, 43
12345