Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

被引：21

作者：

Stalin, B. ^{[1
]}

Ravichandran, M. ^{[2
]}

Vadivel, K. ^{[1
]}

Vairamuthu, J. ^{[3
]}

机构：

[1] Anna Univ, Dept Mech Engn, Reg Campus Madurai, Madurai 625019, Tamil Nadu, India

[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India

[3] Sethu Inst Technol, Dept Mech Engn, Pulloor 626115, Kariapatti, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷

关键词：

Brazing; Brass; 319; L9 orthogonal array; Taguchi method; S/N ratio; ANOVA; WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; STRENGTH; MICROSTRUCTURE; STEEL; BEAM;

D O I：

10.1016/j.matpr.2019.04.226

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Brazing is the metal joining processes of melting a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. The oxyacetylene brazing processes are executed with 18 brass plates, where each pair of same plates is joined together as butt joint. The copper flux powder is used, in order to control the oxidation during brazing processes. Brazed brass 319 joints are tested for the tensile and impact strength observation. The objective of this work is to optimize the process parameters involved in brazing processes using Taguchi optimization with L9 orthogonal array, signal to noise ratio and analysis of variance. The optimization processes are executed using MATLAB software. The obtained results will be helpful to the brazing industries to join the brass plates. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：237 / 243

页数：7

共 50 条

[31] Optimization of green sand casting process parameters by using Taguchi's method
Guharaja, S.
Haq, A. Noorul
Karuppannan, K. M.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 30 (11-12) : 1040 - 1048
[32] Optimization of green sand casting process parameters by using Taguchi’s method
S. Guharaja
A. Noorul Haq
K. M. Karuppannan
[J]. The International Journal of Advanced Manufacturing Technology, 2006, 30 : 1040 - 1048
[33] An Experimental Study and Joining Parameters Optimization of Friction Stir Weld Butt Joint by Taguchi Approach to Maximize the Mechanical Properties
Shunmugasundaram, M.
Nagarajan, S. M.
Reddy, Yadi
Chaurasiya, Prem Kumar
Kumar, Anil
Rajak, Upendra
[J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (07) : 8601 - 8615
[34] Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal
Mookam, Niwat
[J]. DEFENCE TECHNOLOGY, 2019, 15 (03) : 450 - 456
[35] Optimization of GTAW process parameters for deposition of nickel-based hardfacing alloy using Taguchi method
Suthar, Falgun V.
Shah, Hetalkumar N.
Parmar, Ronak N.
Chaudhari, Mrunalkumar D.
Bhatt, Pina M.
Chaudhury, Sujoy K.
[J]. WELDING IN THE WORLD, 2023, 67 (08) : 1951 - 1966
[36] Optimization of process parameters of boron carbide filled Aluminium matrix composites using Grey Taguchi method
Srinivasan, D.
Meignanamoorthy, M.
Ravichandran, M.
[J]. MATERIALS RESEARCH EXPRESS, 2019, 6 (07)
[37] Optimization of Squeeze Casting Parameters for 2017 A Wrought Al Alloy Using Taguchi Method
Souissi, Najib
Souissi, Slim
Le Niniven, Christophe
Ben Amar, Mohamed
Bradai, Chedly
Elhalouani, Foued
[J]. METALS, 2014, 4 (02): : 141 - 154
[38] Optimization of WEDM Cutting Parameters on Surface Roughness of 2379 Steel Using Taguchi Method
Jaafar, Noor Azam
Abdullah, Ahmad Baharuddin
Samad, Zahurin
[J]. SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2018, 11 (02) : 97 - 103
[39] FRICTION STIR WELDING OF AL-MG ALLOY OPTIMIZATION OF PROCESS PARAMETERS USING TAGUCHI METHOD
Vijayan, S.
Raju, R.
Subbaiah, K.
Sridhar, N.
Rao, S. R. K.
[J]. EXPERIMENTAL TECHNIQUES, 2010, 34 (05) : 37 - 44
[40] OPTIMIZATION OF HARD TURNING PROCESS PARAMETERS WITH PCBN TOOL BASED ON THE TAGUCHI METHOD
Puh, Franko
Segota, Toni
Jurkovic, Zoran
[J]. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2012, 19 (02): : 415 - 419

← 1 2 3 4 5 →