Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

被引：21

作者：

Stalin, B. ^{[1
]}

Ravichandran, M. ^{[2
]}

Vadivel, K. ^{[1
]}

Vairamuthu, J. ^{[3
]}

机构：

[1] Anna Univ, Dept Mech Engn, Reg Campus Madurai, Madurai 625019, Tamil Nadu, India

[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India

[3] Sethu Inst Technol, Dept Mech Engn, Pulloor 626115, Kariapatti, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷

关键词：

Brazing; Brass; 319; L9 orthogonal array; Taguchi method; S/N ratio; ANOVA; WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; STRENGTH; MICROSTRUCTURE; STEEL; BEAM;

D O I：

10.1016/j.matpr.2019.04.226

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Brazing is the metal joining processes of melting a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. The oxyacetylene brazing processes are executed with 18 brass plates, where each pair of same plates is joined together as butt joint. The copper flux powder is used, in order to control the oxidation during brazing processes. Brazed brass 319 joints are tested for the tensile and impact strength observation. The objective of this work is to optimize the process parameters involved in brazing processes using Taguchi optimization with L9 orthogonal array, signal to noise ratio and analysis of variance. The optimization processes are executed using MATLAB software. The obtained results will be helpful to the brazing industries to join the brass plates. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：237 / 243

页数：7

共 50 条

[21] Optimization of Robotic Spray Painting process Parameters using Taguchi Method [J].

Chidhambara, K. V. ;

Shankar, B. Latha ;

Vijaykumar .

INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2017), 2018, 310

[22] Optimization of machining parameters in rotary EDM process by using the Taguchi method [J].

E. Aliakbari ;

H. Baseri .

The International Journal of Advanced Manufacturing Technology, 2012, 62 :1041-1053

[23] Design of brass alloy drawing process using Taguchi method [J].

Chen, Dyi-Cheng ;

Huang, Jheng-Yu .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 464 (1-2) :135-140

[24] Effects of activating flux on aluminum alloy to steel butt-joint using a MIG weld-brazing process [J].

Lin, Hsuan-Liang ;

Nan, Fu-Jyun ;

Wang, You-Jiun .

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2021, 15 (06)

[25] Optimization of injection parameters for mechanical properties of specimens with weld line of polypropylene using Taguchi method [J].

Ozcelik, Babur .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2011, 38 (08) :1067-1072

[26] Optimization of FDM process parameters for tensile properties of polylactic acid specimens using Taguchi design of experiment method [J].

Heidari-Rarani, M. ;

Ezati, N. ;

Sadeghi, P. ;

Badrossamay, M. R. .

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2022, 35 (12) :2435-2452

[27] Optimization of brazing conditions for OFHC Cu and ASTM A501 low carbon steel by taguchi method [J].

Wang, Yi Qi ;

Afsar, Ali Md. ;

Song, Jung Il .

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2009, 10 (03) :97-104

[28] Optimization of energy consumption response parameters for turning operation using Taguchi method [J].

Bilga, Paramjit Singh ;

Singh, Sehijpal ;

Kumar, Raman .

JOURNAL OF CLEANER PRODUCTION, 2016, 137 :1406-1417

[29] Optimization of tungsten inert gas welding process parameters for joining austenitic stainless steel and copper using the Taguchi method [J].

Bensaid, Nabil ;

Benlamnouar, Mohamed Farid ;

Laksir, Yazid Laib Dit ;

Saadi, Tahar ;

Badji, Riad .

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2025, 19 (01) :209-219

[30] Optimization of Injection Molding Process Parameters for Carabineer Lock Using the Taguchi Method [J].

Eddy, Priscilia Annie Anak ;

Khor, C. Y. ;

Rosli, M. U. ;

Ishak, Muhammad Ikman .

INTELLIGENT MANUFACTURING AND MECHATRONICS, SIMM 2023, 2024, :653-663

← 1 2 3 4 5 →