Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

被引：21
作者：
Stalin, B. [1 ]
Ravichandran, M. [2 ]
Vadivel, K. [1 ]
Vairamuthu, J. [3 ]
机构：
[1] Anna Univ, Dept Mech Engn, Reg Campus Madurai, Madurai 625019, Tamil Nadu, India
[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India
[3] Sethu Inst Technol, Dept Mech Engn, Pulloor 626115, Kariapatti, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Brazing; Brass; 319; L9 orthogonal array; Taguchi method; S/N ratio; ANOVA; WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; STRENGTH; MICROSTRUCTURE; STEEL; BEAM;
D O I：
10.1016/j.matpr.2019.04.226
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Brazing is the metal joining processes of melting a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. The oxyacetylene brazing processes are executed with 18 brass plates, where each pair of same plates is joined together as butt joint. The copper flux powder is used, in order to control the oxidation during brazing processes. Brazed brass 319 joints are tested for the tensile and impact strength observation. The objective of this work is to optimize the process parameters involved in brazing processes using Taguchi optimization with L9 orthogonal array, signal to noise ratio and analysis of variance. The optimization processes are executed using MATLAB software. The obtained results will be helpful to the brazing industries to join the brass plates. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：237 / 243
页数：7
相关论文
共 50 条
[1]   Optimization of Process Parameter of Brass Butt Joint Using Brazing Process [J].
Venkateswaran, Sriram ;
Ajithkumar ;
Fazil, Shaik ;
Balakrishnan, Kanimozhi .
3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020), 2020, 2311
[2]   Optimization of vacuum brazing process parameters in AA6061 using Taguchi method [J].
Lin, Huei ;
Hwang, Jiun-Ren ;
Fung, Chin-Ping .
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2016, 10 (02)
[3]   Parameters optimization of laser brazing in crimping butt using Taguchi and BPNN-GA [J].
Rong, Youmin ;
Zhang, Zhen ;
Zhang, Guojun ;
Yue, Chen ;
Gu, Yafei ;
Huang, Yu ;
Wang, Chunming ;
Shao, Xinyu .
OPTICS AND LASERS IN ENGINEERING, 2015, 67 :94-104
[4]   Optimization of Friction Stir Processing Parameters for 60/40 Brass using Taguchi Method [J].
Meena, Kamlesh ;
Kumar, Aditya ;
Pandya, Shailesh N. .
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) :1978-1987
[5]   Optimization of vacuum casting process parameters using Taguchi method [J].
Ahmad, Mohd Nazri ;
Alkahari, Mohd Rizal ;
Basir, Mohamad Faris Mohd ;
Maidin, Nurul Ain ;
Wahid, Mohammad Khalid ;
Ab Rahman, Mohd Hidayat ;
Osman, Mohd Hairizal .
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, :146-147
[6]   Optimization of AZ91 friction stir welding parameters using Taguchi method [J].
Asadi, Parviz ;
Akbari, Mostafa ;
Givi, Mohammad Kazem Besharati ;
Panahi, Masoud Shariat .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2016, 230 (01) :291-302
[7]   SLS PARAMETERS OPTIMIZATION USING THE TAGUCHI METHOD [J].
Berce, Petru ;
Pacurar, Razvan ;
Balc, Nicolae ;
Paclisan, Dana .
ANNALS OF DAAAM FOR 2008 & PROCEEDINGS OF THE 19TH INTERNATIONAL DAAAM SYMPOSIUM: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON NEXT GENERATION OF INTELLIGENT SYSTEMS AND SOLUTIONS, 2008, :93-94
[8]   Optimization of manufacturing parameters for a brake lining using Taguchi method [J].
Kim, SJ ;
Kim, KS ;
Jang, H .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 136 (1-3) :202-208
[9]   Optimization of TIG welding process parameters for X70-304l dissimilar joint using taguchi method [J].
Benlamnouar M.F. ;
Hadji M. ;
Badji R. ;
Bensaid N. ;
Saadi T. ;
Laksir Y.L.D. ;
Senouci S. .
Solid State Phenomena, (51-61) :51-61
[10]   Optimization of process parameters for friction stir welding of cast aluminium alloy A319 by Taguchi method [J].
Jayaraman, M. ;
Sivasubramanian, R. ;
Balasubramanian, V. ;
Lakshminarayanan, A. K. .
JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2009, 68 (01) :36-43
12345