ANALYSIS OF WHEEL/RAIL CONTACT GEOMETRY IN TURNOUT SECTION

被引：0
作者：
Sugiyama, Hiroyuki [1 ]
Tanii, Yoshimitsu [1 ]
Suda, Yoshihiro
机构：
[1] Tokyo Univ Sci, Dept Mech Engn, Tokyo 1020073, Japan
来源：
IMECE2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 13 | 2010年
关键词：
SIMULATION; TRAIN;
D O I：
暂无
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
In this investigation, a numerical procedure that can be used for the analysis of wheel/rail two-point contact geometries in turnout sections is developed. In turnout section, the tongue rail changes its shape along the track. Cross-sectional shapes of the tongue rail, therefore, need to be generated by interpolations along the rail and these profiles are used to determine the location of contact points for given location of wheelset along the track trajectory. Numerical examples of wheel/rail contact in point section are presented in order to demonstrate the use of the procedure developed in this investigation and the effect of wheel profiles on the contact configuration in turnout section is discussed.
引用
收藏
页码：805 / 809
页数：5
相关论文
共 50 条
  • [1] Analysis of Wheel/Rail Contact Geometry on Railroad Turnout Using Longitudinal Interpolation of Rail Profiles
    Sugiyama, Hiroyuki
    Tanii, Yoshimitsu
    Matsumura, Ryosuke
    JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, 2011, 6 (02):
  • [2] Mechanical Wear Contact between the Wheel and Rail on a Turnout with Variable Stiffness
    Kisilowski, Jerzy
    Kowalik, Rafal
    ENERGIES, 2021, 14 (22)
  • [3] Rail vehicle passing through a turnout: analysis of different turnout designs and wheel profiles
    Fernando Lagos, Rodrigo
    Alonso, Asier
    Vinolas, Jordi
    Perez, Xabier
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2012, 226 (F6) : 587 - 602
  • [4] Wheel/rail contact dynamics in turnout negotiations with combined nodal and non-conformal contact approach
    Sugiyama, Hiroyuki
    Sekiguchi, Takuto
    Matsumura, Ryosuke
    Yamashita, Shunpei
    Suda, Yoshihiro
    MULTIBODY SYSTEM DYNAMICS, 2012, 27 (01) : 55 - 74
  • [5] Study on the Effect of Dynamic Wheel-rail Contact Geometry Relationship in Turnout Region by the Track-distance Roughness
    Xie, Kaize
    Wang, Ping
    Wang, Li
    Wang, Biao
    Quan, Shunxi
    VIBRATION, STRUCTURAL ENGINEERING AND MEASUREMENT II, PTS 1-3, 2012, 226-228 : 867 - 871
  • [6] Effects of profile wear on wheel-rail contact conditions and dynamic interaction of vehicle and turnout
    Xu, Jingmang
    Wang, Ping
    Wang, Li
    Chen, Rong
    ADVANCES IN MECHANICAL ENGINEERING, 2016, 8 (01) : 1 - 14
  • [7] Using the geometric wheel-rail contact algorithms for fault detection in turnout areas based on the variable section characteristics of rails
    Qian, Yao
    Wang, Ping
    Liu, Yibin
    Gao, Tianci
    Xu, Jingmang
    Wang, Yuan
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2020, 234 (05) : 550 - 563
  • [8] Detailed wheel/rail geometry processing using the planar contact approach
    Vollebregt, E. A. H.
    VEHICLE SYSTEM DYNAMICS, 2022, 60 (04) : 1253 - 1291
  • [9] A method to determine the two-point contact zone and transfer of wheel-rail forces in a turnout
    Ren, Zunsong
    Sun, Shouguang
    Xie, Gang
    VEHICLE SYSTEM DYNAMICS, 2010, 48 (10) : 1115 - 1133
  • [10] Effect of the vertical relative motion of stock/switch rails on wheel-rail contact mechanics in switch panel of railway turnout
    Ma, Xiaochuan
    Wang, Ping
    Xu, Jingmang
    Chen, Rong
    ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (07):
12345