Facile preparation of Cr2O3 nanoparticles and their use as an active catalyst on the thermal decomposition of ammonium perchlorate

Cr2O3 nanoparticles were prepared by repeated wet mechanical milling technique. Three drying methods, oven drying, vacuum drying, and vacuum freeze-drying were comparatively used to dry Cr2O3 nanoparticles. These processes can be easily scaled up to 10-kg quantities. It took only 2-3 h to cut bulk size to nanometer by milling. The obtained Cr2O3 nanoparticles are semi-spherical and homogeneous with an average size of 30 nm measured by SEM and TEM and show similar diffraction peak positions to bulk one investigated by XRD. The TG/DSC study indicated that, compared with bulk Cr2O3, Cr2O3 nanoparticles obtained by oven drying and vacuum drying, the catalytic performance of Cr2O3 nanoparticles obtained by vacuum freeze-drying is the best in lowering the peak temperature of high temperature decomposition and the activation energy, while increasing the apparent decomposition heat and the reaction rate constant of ammonium perchlorate (AP) due to their good dispersion and large specific surface area. The possible catalytic mechanism of Cr2O3 on the thermal decomposition of AP was proposed by TG-MS analysis. These findings showed that wet mechanical milling technique combined with vacuum freeze-drying technology is suitable for efficient preparation of Cr2O3 nanoparticles, which could be a promising additive for accelerating the thermal decomposition of AP.