The Investigated Microstructure and Mechanical Properties of Al2O3/20wt% TiO2 Nanocomposite Coating

被引:0
|
作者
Dejang, Nuchjira [1 ]
Watcharapasorn, Anucha [1 ]
Wirojupatump, Sittichai [2 ]
Hannula, Simo-Pekka [3 ]
Jiansirisomboon, Sukanda [1 ]
机构
[1] Chiang Mai Univ, Dept Phys & Mat Sci, Fac Sci, Chiang Mai, Thailand
[2] Chiang Mai Univ, Fac Sci, Dept Phys, Chiang Mai, Thailand
[3] Aalto Univ, Dept Mat Sci & Engn, Helsinki, Finland
来源
ADVANCES IN SUPERALLOYS, PTS 1 AND 2 | 2011年 / 146-147卷
关键词
Al2O3/TiO2; Al2TiO5; plasma spray; fracture toughness; wear;
D O I
10.4028/www.scientific.net/AMR.146-147.641
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The incorporation of nano-size TiO2 particles can significantly enhance the microstructure and mechanic properties of Al2O3 coating. Phase transformation from mainly stable alpha-Al2O3 and anatase-TiO2 in the powders to predominant metastable gamma-Al2O3 and rutile-TiO2 in the coatings was observed. Reaction between Al2O3 and TiO, phase also occurred producing new phase Al2TiO5 phase. Microstructural investigation showed that well separated TiO, lamellas were homogeneously dispersed between Al2O3 lamellas. It was found that the plasma-sprayed composite coating possessed better wear resistance than that of monolithic Al2O3 coating. The addition of TiO2 was found to improve friction coefficient, wear resistance and fracture toughness.
引用
收藏
页码:641 / +
页数:2
相关论文
共 50 条
  • [21] Mechanical alloying, sintering and characterization of Al2O3-20 wt%-Cu nanocomposite
    Zawrah, Mahmoud F.
    Essawy, Raghieba A.
    Zayed, Hamdia A.
    Fattah, Amira H. Abdel
    Taha, Mohammed A.
    CERAMICS INTERNATIONAL, 2014, 40 (01) : 31 - 38
  • [22] Microstructural and wear characterization of SiC reinforced Al2O3•TiO2 plasma coating
    Yilmaz, Ramazan
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2006, 58 (06) : 312 - 319
  • [23] Evaluation of adhesion and mechanical properties of plasma sprayed NiCrAl/Al2O3-13wt.%TiO2 coatings
    Zhang, Jingjing
    Wang, Zhixing
    Li, Miao
    Wang, Zehua
    Li, Tingju
    Wang, Zhiqiang
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2018, 32 (08) : 801 - 815
  • [24] Investigation on structural, mechanical and tribological properties of plasma sprayed Al2O3-40% TiO2 coating
    Mehar, Sanket
    Sapate, S. G.
    Vashishtha, Nitesh
    Rathod, A.
    Bagde, Pranay
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2525 - 2531
  • [25] Influence of Al2O3 addition on microstructure and mechanical properties of 3YSZ-Al2O3 composites
    Abden, Jaynul
    Afroze, Jannatul Dil
    Gafur, Abdul
    Chowdhury, Faruque-Uz-Zaman
    MATERIALS TESTING, 2015, 57 (06) : 499 - 505
  • [26] Tribological Properties of Plasma-Sprayed 20 Wt. % ZrO2-Al2O3-17 wt.% TiO2 Coatings on Plain Carbon Steel Substrate
    Du Sanming
    Niu Yongping
    Zhang Yongzhen
    ADVANCED MATERIALS RESEARCH II, PTS 1 AND 2, 2012, 463-464 : 420 - +
  • [27] On the Al5083–Al2O3–TiO2 Hybrid Surface Nanocomposite Produced by Friction Stir Processing
    A. Heidarpour
    S. Ahmadifard
    Sh. Kazemi
    Protection of Metals and Physical Chemistry of Surfaces, 2018, 54 : 409 - 415
  • [28] Optimization of Al2O3 and TiO2 Blends to be Used as Erosion Resistant Coating for Mild Steel
    Singh, Varinder
    Kumar, Satish
    Ratha, Dwarikanath
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2020, 142 (10):
  • [29] Effects of CNTs content on microstructure and mechanical properties of Cnt/α-Al2O3 and Cnt-Csf/α-Al2O3 composites
    Jia, Jiangang
    Liu, Diqiang
    Zhang, Sheng
    Zhang, Bo
    Liu, Shunwei
    Ji, Genshun
    CERAMICS INTERNATIONAL, 2019, 45 (16) : 19956 - 19961
  • [30] Effect of Nb plus Ti coating on the wetting behavior, interfacial microstructure, and mechanical properties of Al/Al2O3 joints
    Ksiazek, M.
    Mikulowski, B.
    Richert, M.
    JOURNAL OF MATERIALS SCIENCE, 2010, 45 (08) : 2194 - 2202