High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air

被引:46
作者
Cheng, Xiawei [1 ]
Jiang, Zhengyi [1 ]
Wei, Dongbin [1 ,2 ]
Zhao, Jingwei [1 ]
Monaghan, Brian J. [1 ]
Longbottom, Raymond J. [1 ]
Jiang, Laizhu [3 ]
机构
[1] Univ Wollongong, Sch Mech Mat & Mechatron Engn, Wollongong, NSW 2522, Australia
[2] Univ Technol Sydney, Sch Elect Mech & Mechatron Syst, Sydney, NSW 2007, Australia
[3] Baoshan Iron & Steel Co Ltd, Baosteel Res Inst, R&D Ctr, Shanghai 200431, Peoples R China
关键词
metals; hot working; oxidation; X-ray diffraction; humid air; LOW-CARBON STEEL; WATER-VAPOR; OXIDE SCALES; FE-CR; ALLOY OXIDATION; ATMOSPHERES; OXYGEN; CR2O3; INTERCONNECT; EVAPORATION;
D O I
10.1007/s12540-015-4168-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The high temperature oxidation behaviour of ferritic stainless steel SUS 430 was investigated over the temperature range from 1000 to 1150 A degrees C in humid air containing 18% water vapour. Isothermal thermogravimetric analyses were performed to study the oxidation kinetics. The microstructure, composition and thickness of the oxide scale formed were investigated via optical microscopy (OM), X-ray diffraction and a scanning electron microscope equipped with an energy dispersive spectrometer. The results indicate that breakaway oxidation occurs at all temperatures and that its onset is accelerated by increasing temperature. The growth rate of the multilayer oxide scale follows a parabolic law with apparent activation energy of 240.69 kJ/mol, and the formation of FeO is decreased when the temperature is higher than 1120A degrees C. The inner oxide scale, Fe-Cr spinel, grows mainly inward and internal oxidation is observed even in a short oxidation test at 1150A degrees C for 105 s. The mechanism of high temperature oxidation of SUS 430 in humid air containing 18% water vapour is discussed.
引用
收藏
页码:251 / 259
页数:9
相关论文
共 44 条
[31]   Corrosion stability of ferritic stainless steels for solid oxide electrolyser cell interconnects [J].
Palcut, Marian ;
Mikkelsen, Lars ;
Neufeld, Kai ;
Chen, Ming ;
Knibbe, Ruth ;
Hendriksen, Peter V. .
CORROSION SCIENCE, 2010, 52 (10) :3309-3320
[32]   Cyclic oxidation performance of silicon-alloyed stainless steels in dry and moist air [J].
Pettersson, R ;
Liu, L ;
Sund, J .
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2005, 40 (03) :211-216
[33]   Oxidation Kinetics of AISI 441 Ferritic Stainless Steel at High Temperatures in CO2 Atmosphere [J].
Promdirek, Piyorose ;
Lothongkum, Gobboon ;
Chandra-Ambhorn, Somrerk ;
Wouters, Yves ;
Galerie, Alain .
OXIDATION OF METALS, 2014, 81 (3-4) :315-329
[34]  
Rao S., 2011, OXID MET, V77, P9
[35]  
Reichardt M., 2001, WIRE IND, V68, P505
[36]   Oxidation behavior of stainless steel 430 and 441 at 800°C in single (air/air) and dual atmosphere (air/hydrogen) exposures [J].
Rufner, J. ;
Gannon, P. ;
White, P. ;
Deibert, M. ;
Teintze, S. ;
Smith, R. ;
Chen, H. .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2008, 33 (04) :1392-1398
[37]   First study of manganese diffusion in Cr2O3 polycrystals and thin films by SIMS [J].
Sabioni, A. C. S. ;
Huntz, A. M. ;
Borges, L. C. ;
Jomard, F. .
PHILOSOPHICAL MAGAZINE, 2007, 87 (12) :1921-1937
[38]  
Seybolt A. U., 1960, J ELECTROCHEM SOC, P147
[39]   High-temperature oxidation of Fe-Cr alloys in wet oxygen [J].
Shen, J ;
Zhou, LJ ;
Li, TF .
OXIDATION OF METALS, 1997, 48 (3-4) :347-356
[40]   High temperature oxide scale characteristics of low carbon steel in hot rolling [J].
Sun, WH ;
Tieu, AK ;
Jiang, ZY ;
Lu, C .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 :1307-1312